|
Page 3 of 14 National Evaluation Report No. NER-520
<br /> NATIONAL 3.4 Fire Resistance
<br /> EVALUATION Floor/ceiling, roof and wall assemblies constructed using Insulspan structural
<br /> SERVICE, INC. insulated panels can provide fire resistance ratings per ASTM E 119. One
<br /> floor/ceiling and roof/ceiling assembly and one wall assembly have been evaluated
<br /> Copyright0, 2002 by this report.
<br /> Floor assemblies and roof/ceiling assemblies required to have a fire resistance
<br /> ratings per ASTM E 119 of ONE HOUR shall meet the construction requirements of
<br /> NES Fiqure 2.Wall assemblies required to have a fire resistance ratings per ASTM E 119
<br /> Product Evaluafion Listinq of ONE HOUR shall meet the construction requirements of Fi uq re 3.
<br /> 4.0 iNSTALLATCQN
<br /> When required by the applicable Code, each structure built using Insulspan
<br /> 1.0 SUBJECT Structural Insulated Panels shall be designed by a registered architect or engineer
<br /> — and drawings must be provided which bear their registered stamp or seal when
<br /> applying for a building permit. Such drawings shall contain specific instructions with
<br /> regard to connections,erection,and installation of the panels and shall be available
<br /> 2_0 PROPERTY FOR WHICH at all times on the job site during installation.
<br /> EVALUATION IS SOUGHT
<br /> 5,0 iDENTIFICATIflN
<br /> 3.0 DESCRIPTION All Insulspan Structural Insulated Panels shall be identified by a stamp indicating the
<br /> panel type, NER-520, the manufacturer's name and/or trademark, and the PFS
<br /> Corporation logo and report number(NER-QA251).
<br /> 4.0 INSTALLATION
<br /> 6.(3 �VIC3ENCE SIJBfVEITTED
<br /> 5.0 IDENTIFICATION 6.1 Manufacturer's quality control manual.
<br /> 6.2 Manufacturer's installation Guide
<br /> 6.0 EVIDENCE SUBMITTED 6.3 Report of tests conducted in accordance with ASTM E 72, prepared by PFS
<br /> Corporation:
<br /> • Report#PFS 84-116, signed by Edwin Schaffer, Ph. D., P.E.
<br /> 7_0 CONDITIONS OF USE • Report#PFS 86-50, signed by Edwin Schaffer, Ph. D., P.E.
<br /> � Report#PFS 91-32, signed by Ronald H. Reindl, A.I.A.
<br /> � ���� �� �z'"'���i�tl�r�s°��!. l3 3�. ��.�.
<br /> ��, � � � • Report#PFS 84-17, signed by Edwin Hodgson and Ralph L. Tonn, P.E.
<br /> � *� �'�� ���� • Report#PFS 99-37, signed by James A. Rothman, P.E.
<br /> �£
<br /> � �_� �,�� � .��k�����, �
<br /> � �����f p�ia ' �� 6.4 Report of tests conducted in accordance with ASTM E 119:
<br /> � �� E��°���������� � �����
<br /> -�3�� �_���� ��� • prepared by Southwest Research Institute, SwRI Project No. 01-8305-029,
<br /> r� ' � - dated June 1985,signed by Nigel R.Stamp,Jesse J. Beitel,and Dr.Gordon
<br /> ; , �,t '���' E. Hartzell.
<br /> " ' • prepared by Southwest Research Institute, SwRI Project No. 01-2305-311,
<br /> � ' dated June 1999, si ned b Andre Garabedian and Alex B. Wenzel.
<br /> �� ,,� - �� �:�����.�.��.��-. ` ��� 9 Y
<br /> 6.5 Report of tests conducted in accordance with UL 1256, prepared by Southwest
<br /> Research Institute,SwRI Project No.01-2303-273,dated June 23, 1999,signed
<br /> by Anthony L. Sauceda and Alex B. Wenzel.
<br /> Re-/ssued November 1, 2002
<br /> 6.6 Structural calculations and allowable load tables, prepared by Steven Winter
<br /> Associates, Inc., signed and sealed by George Thomas Bible, P.E., R.A.
<br /> 6.7 Manufacturer's published allowable load tables dated September 9, 1999.
<br /> back to the NES home page 6.8 Report entitled Comparative Tests for NES Qualification of New Adhesive and
<br /> New Bead Applicator, Report No. CI 59908 prepared by CI Professional
<br /> Services, Inc., dated May 29, 1999, signed by Terence J. Cavanagh.
<br /> 6.9 Engineering report on analysis of results of comparative tests concerning
<br /> � �'_ f ����� �� ,�; ' qualification of new adhesive and new bead applicator, prepared by TJC and
<br /> �,�� ���� ��'� � Associates, Inc., TJCAA Project No. 19920, dated May 24, 1999, signed and
<br /> t �m
<br /> ° �'� �� x�� � � ��'"��'����'��' � sealed by Terence Cavanagh.
<br />
|