Laserfiche WebLink
<br />List of Registered SSTS Distribution Media Products • wq-wwists1-22 • March 2014 5 of 5 <br />Infiltrator Systems, Inc. <br />6 Business Park Road <br />P.O. Box 768 <br />Old Saybrook, CT 06475 <br />Phone: 860-577-7198 <br />Fax: 860-577-7001 <br />Email: dlentz@infiltratorsystems.net <br />Web: www.infiltratorsystems.com <br />In the Table (below) under Important Product Information, click on each item to see the following: Notice of Product Listing = MPCA letter to the manufacturer <br />EZflow Manual = Product specific information for Minnesota <br />The EZflow products listed below are registered for use in trenches, beds, at-grades and mounds, as specified in the 'Notice of Product Listing' letter <br />to the manufacturer that you can read under 'Important Product Use Information'. <br />Product Name Product Model *Product Dimensions **Average Sidewall Minimum Inside Registered Width Sizing Invert Important Product <br />Width x Length x Height Infiltrative Height Dimension Width in Minnesota Height Use Information <br />(Inches)(Inches)(Inches)(Inches) (Inches) <br />EZflow 1202H 24 x 120 x 12 6 24 24 6 Notice of Product Listing <br />EZflow 1202H-GEO 24 x 120 x 12 6 24 24 6 EZflow Manual <br />EZflow 1203H 36 x 120 x 12 6 36 36 6 <br />EZflow 1203H-GEO 36 x 120 x 12 6 36 36 6 <br />* A maximum 34 percent reduction is allowed using these products in trenches (only) when the products are 'double stacked' and the entire 18 inches of sidewall is used as an infiltrative surface. <br /> However, the 34 percent reduction does not apply when these bundled expanded polystyrene aggregate products are used in beds, at-grades and mounds. <br />** The EZflow models are also available in 5 foot (60 inch) lengths; these lenghts are also registered for use in Minnesota. <br />As of January 2014, the color of the EZflow synthetic aggregate is now light grey. The blue colorant is no longer added to the product. <br />The pipe, net, and fabric remain unchanged.