Laserfiche WebLink
<br />List of Registered SSTS Distribution Media Products • wq-wwists1-22 • March 2014 4 of 5 <br />Infiltrator Systems, Inc. <br />6 Business Park Road <br />P.O. Box 768 <br />Old Saybrook, CT 06475 <br />Phone: 860-577-7198 <br />Fax: 860-577-7001 <br />Email: dlentz@infiltratorsystems.net <br />Web: www.infiltratorsystems.com <br />In the Table (below) under Important Product Information, click on each item to see the following: Notice of Product Listing = MPCA letter to the manufacturer <br />Quick4 Chamber Manual = Product specific information for Minnesota <br />The Quick4 chambers listed below are registered for use in trenches, beds, at-grades and mounds, as specified in the 'Notice of Product Listing' letter <br />to the manufacturer that you can read under 'Important Product Use Information'. <br />Product Name Product Model Product Dimensions Average Sidewall Minimum Inside Registered Width Sizing Invert Important Product <br />Width x Length x Height Infiltrative Height Dimension Width in Minnesota Height Use Information <br />(Inches)(Inches)(Inches)(Inches) (Inches) <br />Quick4 Chambers Quick4 Equalizer 24 Low Profile (LP) Chambers 16 x 48 x 8 6 14 18 2 and 6 Notice of Product Listing <br />Quick4 Chambers Quick4 Equalizer 24 Chambers 16 x 48 x 11 9 14 18 6 Quick4 Chamber Manual <br />Quick4 Chambers Quick4 Equalizer 36 Chambers 22 x 48 x 12 10 19 24 6 <br />Quick4 Chambers Quick4 Plus Standard Low Profile (LP) Chambers 34 x 48 x 8 6 30 36 0.6 to 9 <br />Quick4 Chambers Quick4 Standard Chambers 34 x 48 x 12 7 29 36 8 <br />Quick4 Chambers Quick4 Plus Standard Chambers 34 x 48 x 12 8.8 30 36 5.3 to 12.7 <br />Quick4 Chambers Quick4 High Capacity (HC) Chambers*34 x 48 x 16 12 29 36 11.5 <br />Quick4 Chambers Quick4 Plus High Capacity (HC) Chambers*34 x 48 x 14 12 30 36 0.8 to 12.7 <br />* A maximum 20 percent reduction is allowed in trenches (only) using this product model when the entire 12 inches of sidewall is used as an infiltrative surface. However, the 20 percent reduction <br /> does not apply when this chamber product is used in beds, at-grades and mounds.