2016 - 00599 - pool- in ground - Laserfiche WebLink

Home Browse Search

„ r.ei IR trilllilial:if Pro essional Se ice Industries, Inc. . Pitts i'urgh Testing L-boratory Division TESTED FOR: Cover-Pouts, Inc. • ATM,: Keay Ragsdale PROJECT: Pool Cover SafetyTests 68 East 3336 South Salt Lake City, Utah 9.1115 • DATE: August 19, 1993 UR REPORT NO.: 700.30110-001 On August 16, 1993, Professional Service Industries was •ntacted by Cover-Pools, Inc. and asked that PSI review ASTM Standard F 1346..:1 to see if tests pe armed by PSI in May end June of 1980 meet the standard performance specitica on of ASTM P1346 91. The standard was reviewed, and tests performed by PSI meet the require ants of ASTM P134.-91. The following Is a report Issued by PSI to Cover Pools, Inc. are of Pool Cov:r Safety tests Which eet the criteria of ASTM P1346-91 (formerly ASTM 4513). On May 31, 1990, a representative •f Professional ' Serv'.a i Cover-Pools, Inc. located at.139 Eat 3335 South, Industries was at the Corporate Offices of Salt Lake City, Utah 84115, to perform safety requirements tests on Cover-Pools, In .,Save-T Cover IIs_fety covers. The safety tests performed were in accordance with ASTM ES 13, Enie •ency Standard Pe ormance Specification for Safety Covers and Labeling Requirements for all covers for Swimming Pools, Spas and Hot Tubs. A 16'x 3 ' pool was located at.the Co ••orate Offices of Cover-Pools, inc. The pool was equipped with an under track Cover-pool safety cover and top track MTh/ mai).Cover-Pool safety cover. The tracking systems ere connected to a redwood deck, with the conn ions at two feet on center along the length of the dek. The safety cover fabric used in the under ck system had a physical property of 16.2 oz/sq. yd. The safety cover fabric used in the top track sy tern had a physical property of 13.2 oz/sq. yd. • STATIC LOAD TEST The static load test was conducted on bath Cover-Po 1 safety covers In accordance with section 9.1 of ASTM ES 13. The weights used we weighed using a calibrated scale which is traceable to the Natio al Bureau of stands ds. The three weights used each had an area of one square foot. One weight weighs 51.0 lbs„ one 210.1 lbs. and one 22 .3 lbs. The total weight u d for the static loadests was 487,4 lbs. Three points we tested for static load on e ch Cover-Pool safety cover. The locations of the three poi is are as follows: 4' from the end 'of the pool in th-•center. 10' from the end of the pool In e center and in the center of the pool. Both Cover-Pool safety covers et the performance quirements for the static load test as outlined in ASTM ES 13 sect on 7.1. 2955 South Wast Temple Street • Salt La.e City, UT 84115 • 801/484.8627 • Fax 801/487.3312