2017 - 00589 - siding - Laserfiche WebLink

Home Browse Search

EZ ICC EVALUATION A PA SERVICE www.apawood.org Joint Evaluation Report ESR-1301* Reissued February 2014 This report is subject to renewal February 2016. www.icc-es.orq I (800) 423-6587 I (562) 699-0543 A Subsidiary of the International Code Council® DIVISION: 06 00 00—WOOD, PLASTICS AND 3.0 DESCRIPTION COMPOSITES Section: 06 16 00—Sheathing 3.1 General: LP SmartSide® Precision Lap Siding and LP SmartSide® DIVISION: 07 00 00—THERMAL AND MOISTURE Precision Panel Siding are engineered-wood exterior wall PROTECTION covering materials that are suitable for long-term exposure Section: 07 46 23—Wood Siding to weather or conditions of similar severity, when fastened to vertical supports or approved nailable wood substrates REPORT HOLDER: in accordance with their span ratings and this evaluation report. The lap siding and panel siding products consist of LOUISIANA-PACIFIC CORPORATION a mat-formed wood substrate preservatively treated with 414 UNION STREET,SUITE 2000 zinc borate in accordance with AWPA Standard T1, and a NASHVILLE,TENNESSEE 37219 resin-impregnated overlay material bonded to the face of (888)820-0325 the lap and panel siding products intended to be exposed www.LPcorp.com to the weather. Additionally, all panel and lap siding edges marketinq.centerc 1pcorp.com are factory-sealed with a sealer in accordance with the approved quality control manual. EVALUATION SUBJECT: 3.2 LP SmartSide®Precision Lap Siding: LP SMART®IDE® PRECISION LAP SIDING AND LP LP SmartSide® Precision Lap Siding is available in widths SMARTSIDE®PRECISION PANEL SIDING of 6, 8 and 12 inches (152, 203 and 305 mm); categories 1.0 EVALUATION SCOPE 3/9 and 7/16; and lengths of 12 to 16 feet (3658 to 4877 mm). The 8-inch-wide (203 mm), /16 category lap Compliance with the following codes: siding is also available with an optional self-alignment edge. • 2012, 2009, 2006, and 2003 International Building Code®(IBC) 3.3 LP SmartSide®Precision Panel Siding: • 2012, 2009, 2006, and 2003 International Residential LP SmartSide® Precision Panel Siding is 4 feet(1219 mm) Code®(IRC) wide and 4, 6, 7, 8, 9 or 10 feet (1219, 1829, 2134, 2438, 2743 or 3048 mm) in length. LP SmartSide® Precision Properties evaluated: Panel Siding is available in 3/6, 7/16, and 19/32- categories. • Exterior siding The 3/6 category panel has grooves spaced at 8 inches (203 mm), with a minimum thickness at the grooves of • Structural 0.164 inch (4 mm) and a minimum thickness at the shiplap of 0.136 inch (4 mm). The 7/16 category panel has grooves 2.0 USES spaced at 4 or 8 inches (102 or 203 mm), with a minimum LP SmartSide® Precision Lap Siding and LP SmartSide® thickness at the grooves of 0.235 inch (6 mm) and a Precision Panel Siding are used as exterior wall covering minimum thickness at the shiplap of 0.150 inch (4 mm). materials on buildings where combustible materials are The /32 category panel has grooves spaced at 4 or permitted. 8 inches(102 or 203 mm),with a minimum thickness at the grooves of 0.311 inch (8 mm) and a minimum shiplap LP SmartSide® Precision Panel Siding may be used as thickness of 0.194 inch(5 mm). bracing method 3 for conventional wood-framed walls as specified in IBC Section 2308.9.3 and IRC Section LP SmartSide® Precision Panel Siding is classified as R602.10. Exterior Rated Siding or Exterior Rated Siding—Sheathing. The classification is noted in the label on the panel. LP SmartSide® Precision Panel Siding may be used as Exterior Rated Siding is intended to be installed in sheathing for wood structural panel shear walls having applications in accordance with IBC Section 2308.9.3 and allowable shear loads specified for PS2-compliant IRC Section R602.10 as an exterior siding suitable for wood-based sheathing in accordance with 2003/2006 IBC long-term exposure to weather or conditions of similar Section 2306.4.1, and 2009/2012 IBC Section 2306.3. severity. In addition to the intended application for Exterior *Revised December 2014 ANSI arm _7a Copyright©2014 Page 1 of 7