Info of proposed roof repairs while maintaining safety

Home Browse Search

09/19/02 THU 10:26 FAX 7634796691 ER SYSTEMS IM 004 Page 6 of 7 FACTORY MUTUAL RESEARCH OB6A5AM 5.1.4 Eraguard 2000- Primer-FR is a base coat spray or roller applied to existing Approved insulated or uninsulated metal panel roofs at a minimum application rate of 0.5 gal/square (0.2 Q/m:') with a minimum 4 mil [0.004 in. (0.1 mm)] dry thickness. After a 12 to 24 hour cure Eraguard 1000 FR, White is applied In a two coat application with each coating applied at a minimum rate of 0.75 gal/square (0.3 Q/m') with a minimum 12.5 mil 10.0125 In. (0.3 mm)] dry thickness. The total dry thickness is minimum 16.5 mil [0.0165 in. (0.42 mm)]. 5.1.5 ASTM E108 Ratings 5.1.5.1 The Eraguard 1000 FR, Gray/Eraguard 1000 FR, White mee Class A ASTM E108 non-combustible deck rating at a maximum roof slope of 1 in 12 when applied aver the maximum 3 in. (76 mm) thick polyurethane spray foam shown in 5.1.1 above. 5.1.5.2 The Eraguard 2000 - Primer-FR/Eraguard 1000 FR, White combination meets Class A ASTM E108 non-combustible deck rating at a maximum roof slope of 1 in 12 when applied over an Factory Mutual'Research Approved insulated or uninsulated metal panel roof. 5.1.6 Hail Ratings -All of the above constructions meet Class 1-SH Nail Rating. 5.2 The roof cover must be installed using an Factory Mutual Research Approved perimeter flashing system. Refer to the current edition of the Factory Mutual Research Approval Guide for details. 5.3 Test results show that the above roof constructions, in and of themselves alone, would not create a need for automatic sprinkler protection. 5.4 The tested roof systems, when Installed as described above, meet the Factory Mutual Research Approval Standards and when Approval is effective, will be listed in the Factory Mutual Research Approval Guide, Roof Coverings section. 5.5 Approval is effective when the Approval Agreement is signed and received by Factory Mutual Research. 5.6 Continued Approval depends on satisfactory field experience and periodic Quality Audit Inspections. 5.7 The securement of the roof system must be enhanced at the building comers and perimeter as outlined in FM Global Property Loss Prevention Data Sheets 1-28 for roof decks and 1-29 for above deck components. VI MARKING 6.1 The manufacturer shall mark each packing container(pail or drum)with the manufacturer's name and product trade name. In addition, the container must be marked with the Factory Mutual Research Approval Mark and the words, "Subject to the conditions of Approval as a protective roof coating for use in Class 1 roof construction as described in the current edition of the Factory Mutual Research Approval Guide." 6.2 Markings denoting Factory Mutual Research Approval shall by applied by the manufacturer only within and on the premises of manufacturing locations that are under the Factory Mutual Research Facilities and Procedures Audit Program.