Laserfiche WebLink
I <br /> 4. RE-ROOFING OVER SHAKE <br /> PROCEDURE No. 13 <br /> INSTALLING GERARD MISSION OR SHAKE TRIM <br /> i' <br /> RIDGE <br /> RAKE <br /> HIP <br /> GERARD MISSION TRIM <br /> Actual Size:151/4"x 6" <br /> (387 x 150mm) <br /> GERARD SHAKE CAP <br /> Actual Size: 151/4"x 6" <br /> (387 x 150mm) <br /> Shake trim is installed the same way as <br /> PURPOSE PROCEDURE mission trim. <br /> To provide a complete trimmed Gerard trim is installed on the ridges, 0 For severe weather conditfvns,it may <br /> appearance to the edges of the roof. rakes, and hips. When installing Gerard be necessary to use a pliable type <br /> trim, keep them in a straight line. Care flashing material to provide a <br /> should be taken when mitering all trim at weathertight seal at trim intersections. <br /> roof intersections. Three (3) circular end <br /> discs are provided in every box of Gerard (Continued) <br /> trim,they are inserted into the ends of each <br /> trim at the fascia to provide a finished <br /> appearance. <br /> GERAR[r Page 50 0 Gerard Roofing Technologies,2001-03-01 <br />