Laserfiche WebLink
Sec. 78-1681. - Driveways, in general. <br /> All driveways shall comply with the following minimum dimensional standards: <br /> (1) Driveways serving end loading garages shall maintain a width equivalent to the width <br /> of all overhead doors extending 15 feet out from the garage doors. <br /> (2) Driveways serving side loading garages shall provide a minimum turn around or back <br /> up depth of 20 feet, as measured from the garage door(s). <br /> (3) Minimum driveway taper ratio shall be 2:1. <br /> (4) Driveways shall be at least eight feet in width at the street or private road. <br /> (5) A turnaround shall be provided for a driveway with direct access to an arterial or <br /> collector roadway, or for a side load garage as determined necessary by the city <br /> planner. The minimum dimensions of the turnaround shall be eight feet in width by 12 <br /> feet in depth. <br /> (6) 'Wheel strip" driveways are allowed, but the entire width of the driveway (from outside <br /> to outside of the strips) will be considered hardcover. <br /> Christine Mattson <br /> Planning Assistant <br /> City of Orono <br /> 2750 Kelly Parkway Orono MN 55356(physical address) <br /> PO Box 66 Crystal Bay MN 55323-0066 (mailing address) <br /> Q 952.249.4620 g 952.249.4616 <br /> E cmattson@ci.orono.mn.us www.ci.orono.mn.us <br /> Office Hours: Monday- Friday 8 am to 4:30 pm <br /> 3 <br />