re: new asphalt - Laserfiche WebLink

Home Browse Search

Specifications (Cont'd) 2 6. Concrete apron slabs in front of storage garage and 550 Tonkawa Road garage will be furnished and installed by Larry Barlett Construction. (952-221-3142). Such construction is not part of this work. i 7. Furnish and install three(3)new catch basins and precast structures. See Drawings C 1 and C2 for locations. A. C. B.No. 1 - Grating to be raised approximately 5" from concrete gutter surface,approximately 20" diameter grating,28" diameter precast structure. Note: This type of catch basin and grating can be viewed at 724 Tonkawa Road. B. C. B.No. 2 - Grating to be flush with finish asphalt,approximately 18" diameter grating and 28" diameter precast structure. C. C. B.No. 3 - Grating to be flush with asphalt, approximately 24"x 36" size and precast structure to be approximately 30" x 42". 8. Furnish and install one layer of approved 300 lb.woven eo textile fabric such as Y PP g ( Amoco 2006)under three (3)areas to receive new base and asphalt. 9. Furnish and install minimum 10 inches of mechanically compacted Mn/DOT (Type 3138) class 5 100%crushed aggregate, or approved CONBIT,or approved class H RAP sub-base at three (3)areas to receive new base and asphalt. 10. Furnish and install 3 inches total of approved MnDOT Type MV3 bituminous base course at three (3)areas to receive new base and asphalt. Furnish and install 2 inches total of approved MnDOT Type MV4 bituminous wear course with good tack coat between base course and wearing surface course. 11. Furnish and install inches total of approved MnDOT Type MV4 bituminous wear course with good tack coat between existing asphalt and new asphalt where 2 inches of existing asphalt was milled. 12. Pavement edges to be restored by Owner's sub-contractor,"Earth, Stone and Water". Asphalt contractor to coordinate work as required. Steve King(952-367- 7960).