Laserfiche WebLink
PART 1 DIVISION 16- ELECTRICAL <br /> Nelson Orangery 9415.00 <br /> October 3, 1994 1 <br /> 16100. GENERAL <br /> A. All work shall comply with the most recent National Electrical Code,applicable state and local <br /> codes,and requirements of the local utility. The Electrical Contractor shall secure and pay for all <br /> permits, licenses, inspections, and service charges required. <br /> B. The purpose of the Drawings and Specifications is to provide a complete electrical installation. <br /> The electrical contractor shall furnish all labor and materials and equipment necessary to complete <br /> the electrical installation whether or not they are shown on the plans. <br /> 16200. MATERIALS <br /> A. Dimmers. receptacles.telelhone jacks and switches shall match existing. Dimmers to be paddle <br /> switched with preset sliding dimmer control. Verify the color with the Architect prior to ordering. <br /> B. All receptacles in exterior walls or ceilings shall be non-metallic boxes with no holes other than for <br /> wiring. (Boxes will be sealed by others.) <br /> C. Floor Receptacles: Shall be Carlon Co. (plastic)duplex receptacle floor boxes,flush mounted, <br /> Cat. No. E97DFM(B) Brown. <br /> D. Other Equipment to be wired: <br /> 1. Hot water radiant floor heating system <br /> 16500. LIGHTING <br /> A. The Electrical Contractor shall install all light fixtures shown on the Drawings. <br /> 1. The Electrical Contractor shall furnish all specified recessed light housings and all trims. <br /> All trims that are not specified shall be part of the fighting allowance. <br /> 2. The Electrical Contractor shall furnish all other specified light fixtures. <br /> 3. The Electrical Contractor shall supply and install lamps for all light fixtures. <br /> B. Light fixture schedule: <br /> Fixture I= <br /> W1 Provide$300 Allowance each <br /> W2 Provide$300 Allowance each <br /> W3 Match existing exterior fixtures <br />