|
Field Programming Options LCM-320: Loop Control Module. Provides one SLC. NFS2-
<br /> 3030 supports up to five LCM-320s and five LEM-320 expand-
<br /> Autoprogram is a timesaving feature.The FACP"learns"what ers for a total of ten SLCs. See DN-6881.
<br /> devices are physically connected and automatically loads
<br /> them in the program with default values for all parameters. LEM-320:Loop Expander Module.Expands an LCM-320.See
<br /> Requiring less than one minute to run, this routine allows the DN-6881.
<br /> user to have almost immediate fire protection in a new installa- SAMPLE SYSTEM: Four-loop NFS2-3030 with display:
<br /> tion,even if only a portion of the detectors are installed. CPU2-3030D, DP-01SP, two BMP-1s, CHS-M3, two LCM-
<br /> Keypad Program Edit. The NFS2-3030, like all NOTIFIER 320s, two LEM-320s, AMPS-24, SBB-A4, DR-A4, BP2-4, BB-
<br /> intelligent panels, has the exclusive feature of program cre- 100,batteries.
<br /> ation and editing capability from the front panel keypad,while NETWORKING OPTIONS
<br /> continuing to provide fire protection. The architecture of the
<br /> NFS2-3030 software is such that each point entry carries its NCA-2: Network Control Annunciator, 640 characters. An
<br /> own program, including control-by-event links to other points. alternate primary display for CPU2-3030 can be provided by
<br /> This allows the program to be entered with independent per- the NCA-2, NCS, or ONYXWorks. Using NCA-2 as primary
<br /> point segments,while the NFS2-3030 simultaneously monitors display enables non-English languages. On network systems
<br /> other(already installed)points for alarm conditions. (two or more networked fire panel nodes),one network display
<br /> (either NCA-2,NCS,or ONYXWorks)is required for every sys-
<br /> VERIFIRE®TOOLS tem. On network systems,the NCA-2 connects(and requires)
<br /> VeriFire®Tools is an offline programming and test utility that a standard Network Communication Module or High-Speed
<br /> can greatly reduce installation programming time, and Network Communication Module. Mounts in a row of FACP
<br /> increase confidence in the site-specific software. It is Win- node or in two annunciator positions.Mounting options include
<br /> dows®based and provides technologically advanced capabili- the DP-DISP, ADP-4B, or in an annunciator box, such as the
<br /> ties to aid the installer. The installer may create the entire ABS-2D. In CAB-4 top-row applications, a DP-DISP and two
<br /> program for the NFS2-3030 in the comfort of the office,test it, BMP-1 blank modules are required for mounting. Non-English
<br /> store a backup file,then bring it to the site and download from versions are available: NCA-2-FR, NCA-2-HE, NCA-2-KO,
<br /> a laptop into the panel. NCA-2-PO,NCA-2-SC, NCA-2-SP, NCA-2-TC, NCA-2-TH. For
<br /> English ULC applications, order NCA-2C; for marine applica-
<br /> Product Line Information tions,order NCA-2-M;for non-English marine applications order
<br /> NCA-2-M and appropriate KP-KIT-XX. See ON-7047.
<br /> • "Configuration Guidelines"on page 4 NCM-W, NCM-F: Standard Network Communications Mod-
<br /> • "Main System Components"on page 4 ules. Wire and multi-mode fiber versions available. See DN-
<br /> • "Networking Options"on page 4 6861.
<br /> • "Auxiliary Power Supplies and Batteries"on page 4 HS-NCM-W/MF/SF/WMF/WSF/MFSF: High-speed Network
<br /> • "Audio Options"on page 5 Communications Modules that can connect to two nodes.
<br /> "Compatible Devices, EIA 232 Ports"on page 5 Wire, single-mode fiber, multi-mode fiber, and media conver-
<br /> • sion models are available. See DN-60454.
<br /> • "Compatible Devices, EIA-485 Ports"on page 5
<br /> "Compatible Intelligent Devices"on page 5 RPT-W, RPT-F, RPT-WF: Standard-network repeater board
<br /> • with wire connection (RPT-W), multi-mode fiber connection
<br /> • "Enclosures,Chassis,and Dress Plates"on page 6 (RPT-F),or allowing a change in media type between wire and
<br /> • "Other Options"on page 7 fiber(RPT-WF). Not used with high-speed networks. See DN-
<br /> 6971.
<br /> CONFIGURATION GUIDELINES ONYXWorks:UL-listed graphics PC workstation,ONYXWorks
<br /> Stand-alone and network systems require a main display. On GUI software, and computer hardware. See DN-7048 for spe-
<br /> single-FACP systems(one NFS2-3030D), the display option is cific part numbers.
<br /> the CPU2-3030D. On network systems (two or more net-
<br /> worked fire panel nodes), at least one NCA-2, NCS, or ONYX- NFN-GW-EM-3: NFN Gateway, embedded. (Replaces NFN-
<br /> Works annunciation device is required. Options listed as GW-EM.) See DN-60499.
<br /> follows. NWS-3: NOTI•FIRE•NETTM Web Server. See DN-6928.
<br /> MAIN SYSTEM COMPONENTS CAP-GW: Common Alerting Protocol Gateway. See DN-
<br /> CPU2-3030D: NFS2-3030 Primary Display. CPU2-3030D 60756.
<br /> ships with keypad/display installed; includes 640-character VESDA-HLI-GW:VESDAnet high-level interface gateway. See
<br /> backlit LCD display, QWERTY programming and control key- DN-60753.
<br /> pad. CPU2-3030 is a central processing unit and requires an LEDSIGN-GW: UL-listed sign gateway. Interfaces with classic
<br /> AMPS-24(E)power supply. For English ULC applications, use and high-speed NOTI•FIRE•NET networks through the NFN
<br /> CPU2-3030DC. Non-English versions are available: CPU2- Gateway. See DN-60679.
<br /> 3030D-FR, CPU2-3030D-HE, CPU2-3030D-KO, CPU2- OAX2-24V: UL-listed LED sign, used with LEDSIGN-GW. See
<br /> DN-3030D-PO, CPU2-3030D-SC, CPU2-3030D-SP, CPU2- AX 2-279.
<br /> 3030D-TC,and CPU2-3030D-TH. For English Marine applica-
<br /> tions order CPU2-3030D-M; for non-English Marine applica- AUXILIARY POWER SUPPLIES AND BATTERIES
<br /> tions order CPU2-3030D-M and the appropriate KP-KIT-XX. AMPS 24(E):One required for each NFS2-3030.Addressable
<br /> (See DN 60688.) power supply and battery charger with two 24 VDC outputs.
<br /> CPU2-3030ND: CPU2-3030 without display. Non-English ver- Addressable by any FlashScan® or CLIP mode FACP.
<br /> sions are available: CPU2-3030ND-FR, CPU2-3030ND-HE, Charges 7 to 200 AH batteries.Occupies up to five addresses
<br /> CPU2-3030ND-KO, CPU2-3030ND-PO, CPU2-3030ND-SC, on an SLC, depending on configuration. Primary input power
<br /> CPU2-3030ND-SP,CPU2-3030ND-TC. for panel. See DN-6883.
<br /> APS2-6R:Auxiliary Power Supply.Provides up to 6.0 amperes
<br /> of power for peripheral devices. Includes battery input and
<br /> Page 4 of 8—DN-7070:P•3/8/17
<br />
|