2018-00234 - alarm system - Laserfiche WebLink

Home Browse Search

tyro Worldwide www.tyco-fire.com Fire Protection Contacts Products Series TY-FRB — 5.6 K-factor Horizontal and Vertical Sidewall Sprinklers Quick Response, Standard Coverage General tained when exposed to corrosive at- mospheres. Although corrosion resis- - „ Description taut coated sprinklers have passed the p standard corrosion tests of the appli- ' 9 The Series TY-FRB, 5.6 K-factor, Hor- cable approval agencies,the testing is not representative of all possible cor- izontal and Vertical Sidewall Sprin- klers described in this data sheet rosive atmospheres. Consequently, it R P ' are quick response -standard cover- is recommended that the end user be age, decorative 3 mm glass bulb type consulted with respect to the suitabil- ' spray sprinklers designed for use in ity of these coatings for any given cor f> light and ordinary hazard, commer rosive environment.The effects of am- cial occupancies such as banks, ho- bient temperature, concentration of tels, shopping malls, etc.They are de- chemicals, and gas/chemical velocity, w signed for installation along a wall or should be considered, as a minimum, the side of a beam and just beneath a along with the corrosive nature of the smooth ceiling. Sidewall sprinklers are chemical to which the sprinklers will commonly used instead of pendent or be exposed. upright sprinklers due to aesthetics or building construction considerations, NOTICE -T.-- where piping across the ceiling is not The Series TY-FRB Sprinklers de- desirable. scribed herein must be installed and - The recessed version of the Series maintained in compliance with this TY-FRB Horizontal Sidewall Sprin- document, as well as with the appli- cable standards of the National Fire kler is intended for use in areas with a finished wall. It uses a two-piece Protection Association, in addition to 't, Style 10 Recessed Escutcheon with the standards of any other authorities A 1/2 inch (12,7 mm)of recessed adjust- having jurisdiction. Failure to do so `- A ment or up to 3/4 inch(19,1 mm)of to- tal adjustment from the flush sidewall devices. may impair the performance of these .-* position, or a two-piece Style 20 Re- The owner is responsible for main- 1 cessed Escutcheon with 1/4 inch (6,4 taining their fire protection system mm) of recessed adjustment or up to and devices in proper operating con- 1/2 inch (12,7 mm) of total adjustment dition. Contact the installing contrac- from the flush sidewall position. The tor or sprinkler manufacturer with any adjustment provided by the Recessed questions. Technical Escutcheon reduces the accuracy to which the fixed pipe nipples to the Sprinkler Data sprinklers must be cut. Corrosion resistant coatings, where Identification Approvals applicable, are utilized to extend the UL and C-UL Listed. life of copper alloy sprinklers beyond Numbers FM, LPCB, and NYC Approved. that which would otherwise be ob- (Refer to Table A for complete approv- TY3331 Horizontal al information including corrosion re- IMPORTANT TY3431 Vertical sistant status.) Always refer to Technical Data Maximum Working Pressure Sheet TFP700 for the "INSTALLER Refer to Table B. WARNING" that provides cau- Discharge Coefficient tions with respect to handling K=5.6 GPM/psi-1/2(80,6 LPM/bar1/2) and installation of sprinkler sys- tems and components. Improp- er handling and installation can Refer to Table A. permanently damage a sprin- Finishes kler system or its components Sprinkler: Refer to Table C. and cause the sprinkler to fail Recessed Escutcheon: Signal or Pure to operate in a fire situation or cause White,Jet Black, Chrome Plated, or it to operate prematurely. Brass Plated. Page 1 of 6 FEBRUARY 2014 TFP176