2016-00189 - plumbing - Laserfiche WebLink

Home Browse Search

Spring Hill Golf Club Training Facility Plumbing Plan No. PLB1601-00101 Page 2 January 27,2016 6. Materials used for water service piping must comply with the standards specified in Minnesota Rules,part 4715.0510. 7. Cross-link polyethylene(PEX)tubing must meet Minnesota Rules,part 4715.0520: a. T'he tubing system must comply with ASTM F877 and F876. b. When installed as a system in accordance with ASTM F877,the system tubing and fittings must be of the same manufacturer and be marked as required. c. When not installed as a system,the fittings must be marked with ASTM F 1807, F 1960,F2080, F2098-01,or F2159. The tubing must list the fitting and tubing standard. d. Installers must be factory trained and possess a card documenting completion of training. 8. Materials used for sanitary sewer piping must comply with the standards specified in Minnesota Rules,part 4715.0530. 9. PVC solvent weld joints must include a primer of contrasting color to the pipe and cement(see Minnesota Rules,part 4715.0810, subpart 2). 10. The water distribution system shall be disinfected per Minnesota Rules,part 4715.2250. 11. The plumbing system shall be tested in accordance with Minnesota Rules,part 4715.2820. NOTE(S): 1. "The scope of this project consists of constructing a new building. Installation includes a water heater,two wall hydrants,a floor drain, a bar sink, and a restroom. 2. The building is served by a private well and a subsurface sewage treatment system. Please review the sewage treatment system construction plans with the appropriate local jurisdiction and verify compliance with Minnesota Rules,Chapter 7080. 3. The construction and location of the water supply well shall be in compliance with Minnesota Rules, Chapter 4725. The project owner, owner's agent or well driller should contact the Minnesota Department of Health, Well Management Unit,at 651/201-4600 before the well construction begins to allow verification that the well is properly sited. 4. The plans and specifications were prepared by a licensed plumber. Only the plumber who has prepared the plans may use the plans for construction. If another plumber is contracted to install the plumbing,they must submit their own plans and specifications for the project. Authorization for construction in accordance with the approved plans may be withdrawn if the plumbing installation is not undertaken within a period of two years. Plan approval does not necessarily mean that recommendations or requirements for change will not be made at some later time when changed conditions, additional information, or advanced knowledge make improvements necessary.