Laserfiche WebLink
Detector Sensitivity Test SD355RA: Same as SD355R with ULC Listing for use with a <br /> D355PLA or DNRA duct detector housing; 6210LPA base <br /> Each detector can have its sensitivity tested (required per included. <br /> NFPA 72,Chapter 14 on Inspection, Testing and Maintenance) <br /> when installed/connected to a MS-9200UD(l.S) or MS- INTELLIGENT BASES <br /> 9600UD(LS)addressable fire alarm control panel.The results NOTE:`A"suffix indicates ULC Listed model. <br /> of the sensitivity test can be printed off the MS-9200UD(LS)or <br /> MS-9600UD(LS)for record keeping. NOTE:The detector's plug-in base can be changed off for special <br /> applications. For details about inteiligent bases and their mount- <br /> ing,see DF-60059. <br /> Specification 6210LP(A): Plug-in detector base (included); standard U.S. <br /> Voftage range: 15-32 VDC(peak). flanged low-profile mounting base. <br /> Standby current:300 NA C�3 24 VDC. B210LPBP:Bulk pack of B210LP;package contains 10. <br /> LED current:6.5 mA� 24 VDC(latched"ON"). B501(A):Standard European flangeless mounting base. <br /> Air velocity:4,000 ft./min.(20 m/sec.)maximum. 8501 BP:Bulk pack of 8501;package contains 10. <br /> Size:2.1"(5.33 cm)high;base determines diameter. 8200SR(A): Intelligent sounder base capable of producing <br /> -6210LP(A):6.1"(15.5 cm)diameter. sound output with ANSI Temporal 3 or continuous tone. <br /> -B501(A):4.1"(10.4 cm)diameter. Replaces 6501 BH series bases in retrofit applications. <br /> -B200SR(A):6.875"(17.46 cm)diameter. B224RB(A): Plug-in System Sensor relay base. Screw termi- <br /> -6224RB{Aj:6.2"(15.748 cm)diameter. nals:up to 14 AWG(2.0 mm2).Relay type:Form-C.Rating:2.0 <br /> A � 30 VDC resistive; 0.3 A � 110 VDC inductive; 1.0 A � <br /> Weight:3.6 oz.(102 g). 30 VDC inductive. <br /> Operating temperature range: for SD355(A): 0°C to 49°C g224B1(A): Plug-in System Sensor iso/afor detector base. <br /> (32°F to 120°F); for SD355T(A):0°C to 38°C(32°F to 100°F). Maximum 25 devices between isolator bases(see DF-52389). <br /> SD355R(A):installed in a DNR(A)/DNRW-20°C to 70°C(-4°F <br /> to 158°F). ACCESSORIES <br /> Temperature:0°C-49°C(32°F-120°F). F110: Retrofit flange to convert B210LP(A) to match the <br /> B350LP(A) profile, or to convert older high-profile bases to <br /> Relative humidity: 10%-93%,non-condensing. low-profile. <br /> Listings F110BP:Bulk pack of F110;package contains 15. <br /> Listings and approvals below apply to the SD355(A), F210: Replacement flange for B210LP(A)base. <br /> SD355T(A), and SD355RT(A) detectors. In some cases, cer- RA100Z(A): Remote LED annunciator.3-32 VDC.Mounts to <br /> tain modules may not be listed by certain approval agencies, a U.S. single-gang electrical box. For use with B501(A) and <br /> or listing may be in process. Consult factory for latest listing B210LP(A)bases only. <br /> status. SMB600:Surface mounting kit <br /> • UL Listed:S1059. M02-04-OO:Test magnet. <br /> • ULC Listed:S1059. M02-09-00:Test magnet with telescoping handle. <br /> • CSFM:7272-0075:0194. XR2B: Detector removal tool. Allows installation and/or <br /> • MEA:243-02-E. removal of detector heads from bases in high ceiling applica- <br /> • FM approved. tions. <br /> XP-4: Extension pole for XR26. Comes in three 5-foot <br /> Product Line Information (1.524 m)sections. <br /> NOTE:'A"suffix indicates ULC Listed model. T55-127-010: Detector removal tool without pole. <br /> SD355: Addressable photoelectric detector; B210LP base BCK-2006: Black detector covers for use with SD355(A)only; <br /> included. box of 10. <br /> SD355A: Sames as SD355 with ULC Listing; 6210LPA base WCK-200B: White detector covers for use with SD355(A) <br /> included. only;box of 10. <br /> SD355T: Same as SD355 but with thermal element; 8210LP <br /> base included. <br /> SD355TA: Same as SD355T with ULC Listing; B210LPA base <br /> included. <br /> SD355R: Remote test Capable addressable photoeleCtriC FireLite�Alarms is a registered trademark of Honeywell International Inc. <br /> detector for Use wlth a D355PL(A) Or DNRA/DNRW duCt 002015 by Honeywell International Inc.All rights reserved.Unauthorized use <br /> detector housing;B210LP base included. of tnis document is strictly pronibited. <br /> I�O �oo� This document is not intended to be used for installation purposes. <br /> We try to keep our product information up-to-date and accurate. <br /> - We cannot cover all specific applications or anticipate all requirements. <br /> BYCII�EBIINi B MAfY1FI�T1AIN6 All specifications are subject to change without notice. <br /> QUALITY SYSTEMS <br /> For more information,contact Fire•Lite Alarms.Phone:(800)627-3473,FAX:(877)699-4105. <br /> www.firelite.com <br /> Page 2 of 2-DF-52384:D•2/11/2015 <br />