fire system plan - Laserfiche WebLink

Home Browse Search

� I I ��• .• • • •- • • • �- • .• Certifications and Approvals Mechanical Properties Color: Off-white Region Certification Dimensions(diame- 4 in.x 1.3 in.(10.2 cm x 3.3 cm) Europe CE 89/336/EEC,EN55022:1998, ter x D): EN50130-4:1995,EN60950:2000, Material: High-impact,fire-retardant ABS plastic EN61000-3-2,EN61000-3-3, EN61000-4-2,EN61000-4-3, Power Requirements EN61000-4-4,EN61000-4-5, Current(alarm): 0.55 mA maximum EN61000-4-6,EN61000-4-11 Current(standby): 0.55 mA nominal USA UL UROX:Smoke-Automatic Fire Detectors power-up Time: 22 sec maximum (UL268and A),UROX7:Smoke-Automatic Fire Detectors Certified for Canada Voltage(minimum): 8 VDC peak from the multiplex bus (cULus) Trademarks FM Trademark names are used throughout this document. In CSFM 7272-1615:175 most cases, these designations are claimed as trademarks NYC-MEA 12-92-E,Vol.14 or registered trademarks in one or more countries by their Hong Kong HKFSD respective owners. Rather than placing a trademark symbol in every occurrence of a trademark name, Bosch Security Systems, Inc. uses the names only in an editorial fashion and to the benefit of the trademark owner with no intention Installation/Configuration Notes of infringing the trademark. Compatible Products Chamber Check is a registered trademark of Bosch Security Systems in the The following products are compatible with the D7050 UnitedStates. Smoke Detector and the D7050TH Smoke Heat Detector: Category Product ID Product Description Control Panels D7024 FACP Ordering Information D7024-EXP FACP for export D7050 Addressable Photoelectric Smoke D7050 Detector Bases D7050-B6 Two-wire base Detector Head Two-wire,UL Listed,open-area smoke detec- Remote DRA-12/24 12/24 VDC remote annunciator tor head for use with the D7024 Addressable Annunciators Fire Alarm Control Panels:requires a D7050- B6 base. D7050TH Addressable Photoelectric D7050TH Parts Included Smoke and Heat Detector Head Two-wire,UL Listed,open-area smoke detec- Quant. Component tor head with a 135°F(57°C)fixed tempera- 1 Detector head ture heat sensor for use with the D7024 Ad- dressable Fire Alarm Control Panels;requires 1 Literature pack a D7050-B6 base. Accessories DRA-12/24 Remote Annunciator DRA•12/24 Technical Specifications (12/24VDC) Environmental Considerations Designed to provide remote annunciation of alarms when connected to the D7050-B6 Mul- Radio Frequency Interfer- No alarm or setup on critical frequencies in the tiplex Detector Base ence(RFI)Immunity: range of 26 MHz to 950 MHz forfield strengths DT-2 Detector Removal Tool DT-2 less than 50 V/m Use the DT-2 to remove,replace,or test the Temperature +32°F to+100°F(0°C to+38°C) detector head (normal operating): SMK-TM Test Magnet SMK-TM Note:The environment where these detectors are installed must be within Used to test detectors the specified normal operating temperature limits.