Laserfiche WebLink
� � � <br /> �43 �afayette Road N. MINNESOTA DEPARTMENT OF' (651)284-5005 <br /> St. Paul, Minnesota 55155 i �BOR & IItiiDUSTRY 1-800-342-5354 <br /> www.dli.mn.gov <br /> � <br /> Division of Construction Codes and Licensing <br /> REPORT ON PLANS <br /> Plans and specifications on plumbing: M&K Nail Spa, 2377 Shadywood Road, Orono, �r�gp�gi�qE�, <br /> Minnesota,Plan No. PLB1512-00005 tC:t \/ <br /> UEC " 1 2015 <br /> OWNERSHIP: <br /> CITY OF ORONO <br /> SUBMITTER: Barr Web Industries Incorporated, 3530 East 28th Street,Minneapolis,MN 55406 <br /> Date Received: December 29,2015,December 10,2015, December l,2015 <br /> Date Approved: December 30,2015 <br /> SCOPE: This review is limited to the provisions of the Minnesota Plumbing Code, as amended. The review is <br /> based upon the supposition that the data on which the design is based are correct. Approval is contingent upon <br /> requirements included in this report. A copy of the approved plans,specifications,and this Report on Plans <br /> must be retained at the project location for future reference. <br /> INSPECTIONS: All plumbing installations must be tested and inspected in accordance with the requirements of <br /> the Minnesota Plumbing Code. No plumbing work may be covered prior to completing the required tests and <br /> inspections. The contractor/installer must obtain an inspection permit from the Minnesota Department of Labor <br /> and Industry when an installation is for a state owned facility,Minnesota Department of Health licensed <br /> healthcare facility, or a project in an area where there is no local administrative authority. To schedule <br /> inspections,contact the state plumbing standards representative for your region. For your regional inspector's <br /> contact information,visit our website at http://www.dli.mn.gov/CCLD/CCLDContactus.asp <br /> REQUIREMENT(S): <br /> 1. Pedicure spas with water inlets below the spill line must have approved high-hazard backflow preventers, <br /> pressure-type or spill-proof at minimum, on each fixture branch to a pedicure spa(see Minnesota Rules, <br /> part 4715.2100). Pressure or spill-proof vacuum breakers must be installed at least 12 inches above the <br /> flood level of the fixture served. <br /> 2. Pedicure spas must drain by gavity(see Minnesota Rules,part 4715.1200 and part 4715.2430). <br /> 3. Verify that the existing water supply and waste systems are sized to accommodate the added fixtures(see <br /> Minnesota Rules,part 47153800 and part 4715.2310). <br /> 4. A cleanout should be provided where new waste and vent piping connects with existing for testing. <br /> 5. Cross-link polyethylene(PEX)tubing must meet Minnesota Rules,part 4715.0520: <br /> a. The tubing system must comply with ASTM F877 and F876. <br /> b. When installed as a system in accordance with ASTM F877,the tubing and fittings must be of the same <br /> manufacturer and be marked as required by the manufacturer. <br /> c. When not installed as a system,the fittings must be marked with ASTM F 1807,F 1960, F2080, <br /> F2098-01, or F2159. The tubing must list the fitting and tubing standard. <br /> d. Installers must possess a card documenting completion of factory training. <br /> This information can be provided to you in afternative formats(Braille,large print or audio). <br /> An Equal Opportunity Employer <br />