Laserfiche WebLink
A. Available Manufacturers: Subject to compliance with requirements. <br /> 1. Solid Core Doors: <br /> 2. Hollow Core Doors: <br /> 2.2 EXTERIOR FLUSH WOOD DOORS <br /> 1. Grade: Premium. <br /> 2. Grade: Custom. <br /> 3. Construction: 7 plies. <br /> 4. Core: Glued-block core. <br /> 5. Bonding: Stiles and rails bonded to core,then entire unit abrasive planed before veneering. <br /> A.. Solid Core Doors for Opaque Finish on Exterior,Transparent Finish on Interior: Comply <br /> with the following requirements: <br /> 1. Exterior Face: Medium-density overlay over standard thickness,hardwood face veneers. <br /> 2. Interior Face: White ash,plain sliced. <br /> 3. Crrade: Premium. <br /> 4. Construction: 7 plies. <br /> 5. Core: Glued-block core. <br /> 6. Bonding: Stiles and rails bonded to core,then entire unit abrasive planed before veneering. <br /> 2.3 INTERIOR FLUSH WOOD DOOR5 <br /> A. Solid Core Doors for Transparent Finish: Comply with the following requirements: <br /> 1. Faces: White birch,plain sliced. <br /> 2. Grade: Premium. <br /> 3. Grade: Custom. <br /> 4. Construction: 7 plies. <br /> 5. Core: Glued-block core. <br /> 6. Bonding: Stiles and rails bonded to core,then entire unit abrasive planed before veneering. <br /> B. Pairs and Sets: Provide pair matching and set matching for pairs of doors and for doors hung <br /> in adjacent sets. <br /> 1. Continuous matching. <br /> 2.4 FABRICATION <br /> A. Fabricate flush wood doors to comply with following requirements: <br /> 1. In sizes indicated for job-site fitting. <br /> 2. Factory fit doors to suit frame-opening sizes indicated, with the following uniform <br /> clearances and bevels: <br /> a. Comply with clearance requirements of referenced quality standard for fitting. <br /> Comply with requirements of NFPAa80 for fire-resistance-rated doors. <br /> B. Factory machine doors for hardwaze that is not surface applied. Locate hardware to comply <br /> with DHI-WDHS-3. Comply with final hardware schedules,door frame shop drawings,DHIaA 115-W series <br /> standards,and hardwaze templates. <br /> Page 3 of 5 <br />