Laserfiche WebLink
PAPPAS DESIGN Bathroom Specifications Page 13 <br /> a. Miscellaneous <br /> None <br /> b. Continued <br /> PAPPAS recommends that all tile be approved by client prior to <br /> installation, that paint and grout colors be verified with <br /> client/designer before application <br /> c. Continued <br /> Contractor to evaluate existing insulation and HVAC system and <br /> recommend needed changes to insure maximum HVAC performance <br /> d. Continued <br /> Contractor to provide backing for all wall-hung hardware <br /> e. Continued <br /> Contractor to verify locations of all towel bars, grab bars and <br /> other accessories with client at site before installation of <br /> backing and final install <br /> DISCLAIMER OF LIABILITY FOR UNINTENDED USE OF PLANS & SPECIFICATIONS <br /> PLEASED BE ADVISED that these plans and specifications together with attachments <br /> hereto, if any, are to be used in complete compliance with the following <br /> conditions. Any other use than intended by PAPPAS as stated below shall be at <br /> the sole risk of the user: <br /> 1. ALL WORK TO CONFORM WITH ALL APPROPRIATRE CODES AND ALL MATERIALS TO BE <br /> INSTALLED ACCORDING TO MANUFACTURER'S INSTRUCTIONS; <br /> 2. ALL MEASUREMENTS TO BE FIELD VERIFIED AND DISCREPANCIES REPORTED IMMEDIATELY <br /> TO DESIGNER FOR RESOLUTION; <br /> 3 . CABINETMAKER IS TO VERIFY ALL EQUIPMENT AND EQUIPMENT CABINET DIMENSIONS <br /> BEFORE CONSTRUCTION; <br /> 4. ALL CABINET DETAILS TO BE APPROVED IN WRITING BY PAPPAS BEFORE CONSTRUCTION; <br /> 5. "V" IN BLUEPRINTS INDICATE "VERIFY"; <br /> 6. "TBS" IN SPECIFICATIONS INDICATE "TO BE SPECIFIED"; <br /> 7. STRUCTURAL AND ARCHITECTURAL DESIGN TO BE PERFORMED BY OTHERS THAN PAPPAS. <br /> PAPPAS does hereby disclaim responsibility and liability for failure to comply <br /> with the foregoing requirements and failure to follow them to the degree that <br /> conforms to the standard of the industry. <br />