Laserfiche WebLink
H. At fiber reinforced concrete mix design,include fiber manufacturers name,fiber type, <br /> fiber size,rate of application and recommendations for batch plant application of fibers <br /> into concrete mix. <br /> PART 2 PRODUCTS <br /> 2.1 REINFORCING <br /> A. Reinforcing Steel: ASTM A615,Grade 60. <br /> B. Epoxy Coated Reinforcing Steel: ASTM A775. <br /> C. Reinforcing Steel to be Welded: ASTM A706. <br /> D. Welded Steel Wire Fabric: ASTM A185. <br /> E. Smooth Bar Dowels: AASHTO M31,Grade 40 or 60,plain round bars. <br /> F. Collated Fibrillated Polyproplyene Fibers: Fibermesh by Fibermesh Inc.,Forta CR by <br /> Forta Corporation,or Grace Fibers by W.R. Grace&Co. <br /> 2.2 ACCESSORY MATERIALS <br /> A. Wire Bar Type Supports: CRSI <br /> B. Supports: For slabs-on-grade with steel reinforcement use supports with sand plates or <br /> horizontal runners where base materials will not support chair legs. <br /> C. Plastic-Tipped or Stainless Steel Legs: Use for exposed-to-view concrete surfaces,or <br /> where concrete surfaces will be exposed to weather where legs of supports are in contact <br /> with forms. Hot dip galvanized support accessories may be used against formed surfaces <br /> not exposed to view or to weather. <br /> D. Precast Concrete Chairs: Use over membrane waterproofmg or moisture barrier to <br /> prevent penetration of membrane or barrier. <br /> E. Epoxy-Coated Supports and Tie Wire: Use with epoxy-coated steel reinforcing. <br /> F. Epoxy-Coated Steel Reinforcing Touch-up Coating: 3M Scotchkote 213PC. <br /> 2.3 FABRICATION <br /> A. Fabricate steel reinforcement in accordance with ACI 315 and reviewed shop drawings. <br /> B. Do not re-bend or straighten steel reinforcement in manner that will injure or weaken <br /> material. <br /> ADDENDUM#1 <br /> 1607.001 -ORONO ICE ARENA(CP-2) Page 03200-3 <br />