Laserfiche WebLink
DN-5286:A1•K-225 <br /> FM Series NOTIFIER® <br /> Electromagnetic Door Holders <br /> by Honeywell <br /> Miscellaneous <br /> General <br /> FM Series electromagnetic door holders are designed for vir- <br /> tually any remote door release application.They are primarily <br /> used to hold fire and smoke barrier doors open until released <br /> by a remote smoke detector or other switching device. The <br /> complete assembly consists of:an armature contact plate with <br /> adjustable pivot mounting for installation in the door, and a <br /> heavy-duty electromagnet, in a durable plastic enclosure, t <br /> mounted on the wall or floor behind the door. A separate clos i' 1!001„— <br /> ing device is required. <br /> _ 1 <br /> Features <br /> • All models support 12 VDC,24 VACNDC,or 120 VAC. <br /> • Improperly applied voltage does not damage the unit. 5286 ,.m9 <br /> • Spacing kit for odd angles. <br /> • 25 to 40 pounds(11.3 kg)holding power. <br /> • Magnet protected against transients and surges up to 600 <br /> volts(AC models). FM996 <br /> • Fail-safe operation;power failure releases door to close. <br /> • Positive release button initiates closing motion. <br /> • Two-year warranty. Ordering Information <br /> • Floor-and wall-mount models. FM980: Surface floor-mount model for single door; 12 VDC, <br /> 24 VACNDC, 120 VAC. <br /> Installation FM996: Surface wall-mount model; 12 VDC, 24 VACNDC, <br /> • Used in hospitals, schools, offices, nursing homes, and 120 VAC. <br /> public buildings. FM998: Flush wall-mount model; 12 VDC, 24 VACNDC, 120 <br /> • Install where required by code,where doors may be used to VAC. <br /> confine smoke or fire, or wherever remote control or auto FM900: Extension kit. <br /> matic closing doors are required. <br /> • Ensure that door hardware and trim projections are compat- Extension kit,90°. <br /> ible with total projection of door release. FM900-50: Spacer, 1/2"(1.27 cm). <br /> • Anchor the electromagnet firmly, as the wall portion will FM900-75: Spacer,3/4"(1.905 cm). <br /> function as a doorstop. <br /> Locate magnet approximately 6°(15.24 cm)in from the lock FM900-100: Spacer, 1"(2.54 cm). <br /> • stile at the door. Wall magnets should be mounted approxi- <br /> mately two to four feet(0.61 to 1.22 meters)above the floor <br /> for optimum performance. <br /> • Door-mounted contact plate includes hardware for thrubolt- <br /> ing or concealed mounting. <br /> • Spotting template included with unit assures correct align- <br /> ment. <br /> • 14 AWG(2.0 mm2)maximum wire size. <br /> Agency Listings and Approvals <br /> These listings and approvals apply to the modules specified in <br /> this document.In some cases,certain modules or applications <br /> may not be listed by certain approval agencies, or listing may <br /> be in process.Consult factory for latest listing status. <br /> • UL/ULC Listed: R4869 <br /> • MEA Listed:447-00-E <br /> • CSFM:3550-0028:210 <br /> DN-5286:A1•8/3/10—Page 1 of 2 <br />