2016-00602 - alarm system - Laserfiche WebLink

Home Browse Search

DN-6726:C•H-240 NBG-12LX NOTIFIER® Addressable Manual Pull Station by Honeywell Intelligent/Addressable Devices General The Notifier NBG-12LX is a state-of-the-art, dual-action (i.e., FIRE requires two motions to activate the station) pull station that includes an addressable interface for any Notifier intelligent control panel except FireWarden series panels. Because the NBG-12LX is addressable, the control panel can display the exact location of the activated manual station. This leads fire personnel quickly to the location of the alarm. H IN !PULL DOW N Features • Maintenance personnel can open station for inspection and address setting without causing an alarm condition. • Built-in bicolor LED, which is visible through the handle of the station, flashes in normal operation and latches steady red when in alarm. • Handle latches in down position and the word"ACTIVATED" N oT r F t E H appears to clearly indicate the station has been operated. • Captive screw terminals wire-ready for easy connection to SLC loop(accepts up to 12 AWG/3.25 mm2 wire). • Can be surface mounted (with SB-10 or SB-I/O) or semi The NBG-12LX flush mounted. Semi-flush mount to a standard single- gang, gang,double-gang,or 4"(10.16 cm)square electrical box. Addressable Manual Pull Station • Smooth dual-action design. • Meets ADAAG controls and operating mechanisms guide- Installation lines (Section 4.1.3[131); meets ADA requirement for 5 lb. The NBG-12LX will mount semi-flush into a single-gang,dou- maximum activation force. ble-gang, or standard 4" (10.16 cm) square electrical outlet • Highly visible. box, or will surface mount to the model SB-10 or SB-I/O sur- • Attractive shape and textured finish. face backbox. If the NBG-12LX is being semi-flush mounted, • Key reset. then the optional trim ring (BG12TR) may be used. The • Includes Braille text on station handle. BG12TR is usually needed for semi-flush mounting with 4" (10.16 cm)or double-gang boxes(not with single-gang boxes). • Optional trim ring(BG12TR). • Meets UL 38, Standard for Manually Actuated Signaling Operation Boxes. • Up to 99 NBG-12LX stations per loop on CLIP protocol Pushing in,then pulling down on the handle causes it to latch loops. in the down/activated position. Once latched, the word"ACTI- VATED" (in bright yellow) appears at the top of the handle, • tocol loops. while a portion of the handle protrudes from the bottom of the station.To reset the station, simply unlock the station with the • Dual-color LED blinks green to indicate normal on Flash- key and pull the door open.This action resets the handle;clos- Scan®systems. ing the door automatically resets the switch. Construction Each manual station, on command from the control panel, sends data to the panel representing the state of the manual Shell, door, and handle are molded of durable polycarbonate switch.Two rotary decimal switches allow address settings material with a textured finish. (1 —159 on FlashScan®systems, 1 —99 on CLIP systems). Specifications Architectural Engineering • Shipping Weight:9.6 oz.(272.15 g) Specifications • Normal operating voltage:24 VDC. Manual Fire Alarm Stations shall be non-coded, with a key- • Maximum SLC loop voltage:28.0 VDC. operated reset lock in order that they may be tested, and so • Maximum SLC loop current:375 pA. designed that after actual Emergency Operation, they cannot be restored to normal except by use of a key.An operated sta- • Temperature Range:32°F to 120°F(0°C to 49°C) tion shall automatically condition itself so as to be visually • Relative Humidity: 10%to 93%(noncondensing) detected as activated. Manual stations shall be constructed of • For use indoors in a dry location red-colored polycarbonate material with clearly visible operat- ing instructions provided on the cover. The word FIRE shall appear on the front of the stations in white letters, 1.00 inches (2.54 cm) or larger. Stations shall be suitable for surface DN-6726:C•09/02/2009—Page 1 of 2