Laserfiche WebLink
Installation with ANSI Temporal 3, ANSI Temporal 4, continuous tone, <br /> marching tone,and custom tone. <br /> The FST Series plug-in intelligent thermal detectors use a sep- <br /> arate base to simplify installation, service, and maintenance. B200SR(A): Intelligent sounder base capable of producing <br /> Installation instructions are shipped with each detector.A spe- sound output with ANSI Temporal 3 or continuous tone. <br /> cial tool allows maintenance personnel to plug in and remove Replaces B501 BH series bases in retrofit applications. <br /> detectors without using a ladder B224RB(A): Intelligent relay base. Screw terminals: up to 14 <br /> Mount base(all base types)on an electrical backbox which is AWG(2.0 mm2). Relay type: Form-C.Rating:2.0 A @ 30 VDC <br /> at least 1.5'(3.81 cm)deep. For a chart of compatible junction resistive;0.3 A © 110 VDC inductive; 1.0 A ® 30 VDC induc- <br /> boxes,see DN-60054. tive. <br /> NOTE: 1) Because of the inherent supervision provided by the B224B1(A): Intelligent isolator base. Isolates SLC from loop <br /> SLC loop,end-of-line resistors are not required. Wiring'T-taps"or shorts. Maximum: 25 devices between isolator bases; see <br /> branches are permitted for Style 4 (Class "B") wiring. 2) When Note 2 under Installation. <br /> using relay or sounder bases, consult the ISO-X(A) installation <br /> sheet 156-1380 for device limitations between isolator modules ACCESSORIES <br /> and isolator bases. F110: Retrofit flange to convert B210LP(A) to match the <br /> B710LP(A) profile, or to convert older high-profile bases to <br /> Agency Listings and Approvals low-profile. <br /> These listings and approvals apply to the modules specified in F110BP:Bulk pack of F110;package contains 15. <br /> this document.ln some cases, certain modules or applications F210: Replacement flange for B210LP(A)base. <br /> may not be listed by certain approval agencies, or listing may <br /> be in process. Consult factory for latest listing status. RA100Z(A): Remote LED annunciator. 3—32 VDC. Fits U.S. <br /> UL Listed:S747. single-gang electrical box. Supported by B210LP(A) and <br /> • B501(A)bases only. <br /> • ULC Listed:S6978. SMB600:Surface mounting kit,flanged. <br /> • MEA Listed:383-02-E. M02-04-00:Test magnet. <br /> • FM Approved. <br /> • CSFM:7270 0028:0196. M02-09-00:Test magnet with telescoping handle. <br /> • BSMI:CI313066760025. XR2B: Detector removal tool. Allows installation and/or <br /> CCCF:Certif.#2004081801000018. removal of FlashScan® Series detector heads from base in <br /> • high ceiling installations.Includes T55-127-010. <br /> • U.S.Coast Guard: 161.002/42/1 (NFS-640); 161.002/50/0 T55-127-010: Detector removal tool without pole. <br /> (NFS2-640/NFS-320/NFS-320C,excluding B210LP(A)). <br /> • Lloyd's Register: 11/600013 (NFS2-640/NFS-320/NFS- XP-4: Extension pole for XR2B. Comes in three 5-foot(1.524 <br /> 320C,excluding B210LP(A)). m)sections. <br /> Product Line Information <br /> NOTE:"A"suffix indicates ULC Listed model. <br /> FST-851:Intelligent thermal detector. Must be mounted to one <br /> of the bases listed below. <br /> FST-851A:Same as FST-851 but with ULC Listing. <br /> FST-851R: Intelligent thermal detector with rate-of-rise fea- <br /> ture. <br /> FST-851 RA:Same as FST-851 R but with ULC Listing. <br /> FST-851H: Intelligent high-temperature thermal detector. <br /> FST-851 HA:Same as FST-851 H but with ULC Listing. <br /> INTELLIGENT BASES <br /> NOTE:"A"suffix indicates ULC Listed model. <br /> NOTE:For details about intelligent bases and their mounting,see <br /> DN-60054. <br /> B210LP(A):Standard U.S.flanged low-profile mounting base. <br /> B210LPBP: Bulk pack of B210LP;package contains 10. <br /> B501(A):Standard European flangeless mounting base. <br /> B501 BP:Bulk pack of B501;package contains 10. Notifier® and FlashScan® are registered trademarks of Honeywell <br /> entprogrammable sounder <br /> ( ) g <br /> B200S A : Addressable Intelligent, InternationHl Inc. <br /> ©2011 by Honeywell International Inc.All rights reserved.Unauthorized use <br /> base capable of producing sound output in high or low volume of this document is strictly prohibited. <br /> ISO 9001 This document is not intended to be used for installation purposes. <br /> We try to keep our product information up-to-date and accurate. <br /> C E R T t F t E O We cannot cover all specific applications or anticipate all requirements. <br /> ENCINEMINC 8 MANIFACIENN6 All specifications are subject to change without notice. <br /> QUALITY SYSTEMS Made in the U.S.A. <br /> For more information,contact Notifier.Phone:(203)484-7161,FAX:(203)484-7118. <br /> www.notifier.com <br /> Page 2 of 2—DN-6936:B•12/07/2011 <br />