2016-00602 - alarm system - Laserfiche WebLink

Home Browse Search

• Separate Trouble and AC Fail Form-C relay contacts. HPFF8E:240VAC/50Hz version of HPFF8. • The Trouble Form-C relay contacts selectable for immediate HPFF8CM: 8.0A fire rated power supply (chassis mounted). or a 2 hour delay with AC failure. Unit includes mounting hardware, battery cable and instruc- • 26 AH battery charger capability: tions for installation in large equipment enclosure. 120VAC/ -HPFF8(E)supports two 12V 18AH batteries 60Hz. -HPFF8CM(E)supports two 12V 12AH batteries per unit. HPFF8CME:240VAC/50Hz version of HPFF8CM. • NAC Overload protection and indication. HP P31076: Class A(Style Z) NAC Adaptor. Increase Class A • Provision for mounting single or 6 circuit addressable con- circuits from 2 to 4. trol or relay modules inside the enclosure. (Use mounting Large Equipment Enclosure:EQ series cabinet for mounting kit PN 90475.) HPFF8CM power supplies consists of a backbox (EQBB-D4) and a locking door(EQDR-D4 or FCI-VDR-D4B). Order sepa- Specifications rately. Primary Input Power: 120VAC, 60Hz, 3.6A standard; CMF-300-6: Six-circuit supervised addressable control mod- 240VAC,50Hz, 1.5A on units with E suffix. ule activated through FACP programming on a select basis to control power supply activation or output. Secondary Power:24 volt operation:two 7-26 AH batteries. CMF-300: Supervised addressable control module activated Battery Charging Capacity: Up to 26 AH batteries. through FACP programming to activate power supply. HPFF8 Cabinet: Holds up to two 18AH batteries. BAT-12120:Battery, 12 volt, 12.0 AH(two required). HPFF8CM: Holds up to two 12AH batteries. BAT-1270: Battery, 12 volt,7.0 AH (two required). Total Output Current:8.0A max. 90474: Mounting kit; required to attach an addressable mod- Standby Current:0.075 A. ule onto the control circuit board(included with supply). Auxiliary Power Output:2.0A under all conditions. NAC Output Ratings: 24VDC fully regulated, 3.0A max per Listings and Approvals circuit(8.0A total). Listings and approvals below apply to all. In some cases,cer- tainEnd-of-Line Resistor Range:1.9K to 25k ohm,I/2 watt. Prod- modules may not be listed by certain approval agencies, uct ships with 4 separate programming resistors. They are or listing may be in process.Listed under UL 864 9th Edition. 3.9K(5 each-only need one for programming),2.2K(1 each), • UL Listed:S24562 4.7K(1 each)and 10K(1 each) • FM Approved Common Trouble:2.0A at 30VDC. • CSFM:7315-1637:0102 Relay Fail Relay:2.0A at 30VDC. • NYFD:COA#6032 Input Control Circuits: compatible with 12 and 24 VDC con- trol panel NACs. Input Control Current (alarm): 5.68 mA @ 12 VDC, 12.28 mA CO 24 VDC. Temperature Rating:32°F to 120°F(0°C to 49°C). Relative Humidity: 10%to 93%non-condensing. Cabinet Dimensions: • HPFF8 Cabinet: 16.65" W x 19.0" H x 5.2" D (42.29 W x 48.26 H 13.23 D cm) • Large equipment enclosure(EQBB-D4): 24"W x 45.9" H x 5.15" D(60.96 W x 116.52 H x 13.1D cm) Product Line Information HPFF8: 8.0A fire rated power supply. Unit includes red enclo- sure,battery cable and installation instructions.120VAC/60Hz. This document is not intended to be used for installation purposes.We try to keep our product information up-to-date and accurate.We cannot cover all specific applications or anticipate all requirements.All specifications are subject to change without notice. System Sensore is a registered trademark of Honeywell International Inc. ©2010 by Honeywell International Inc.All rights reserved.Unauthorized use of this document is strictly prohibited. Automation and Control Solutions Honeywell Honeywell 12 Clintonville Road 1(877)HPP-POWR Northford,CT 06472-1610 hpp.techsery@honeywell.com www.honeywellpower.com DH-60541:C1 August 2010 ®Made in the U.S.A. ISO 9001 U.S VVU.S Registered Trademark a 2010 Honeywell International Inc. EIMM111NI 1 MWIFIIrf11YlI Page 2 of 2 QUALITY SYSTEMS