Laserfiche WebLink
FILE#16-3879 <br /> November 21,2016 <br /> Page 2 of 5 <br /> (10)Pylon sign.A sign supported by a post or posts so that the sign and supports are <br /> finished to grade by encasing the posts in a material consistent with the sign and <br /> where the base width dimension is a minimum of ten percent up to and including 50 <br /> percent of the greatest width of the sign. <br /> (11)Monument signs. One monument sign, limited to two faces is allowed per <br /> frontage per property, with a maximum of two. The areas of sign base, the supporting <br /> background structure, and the sign copy shall be combined for determining the total <br /> square footage and the height of the monument sign. <br /> a. The total allowable square footage shall not exceed 100 square feet per side. <br /> The base and supporting material shall constitute at least 25 percent of the total <br /> square footage. <br /> b. The base width dimension is 50 percent or more of the greatest width of the <br /> sign. <br /> c. The sign copy area shall have a minimum clearance of 20 inches above ground <br /> level. <br /> d. The sign copy area shall be completely enclosed within the monument <br /> materials. <br /> e. No portion of the sign or sign structure shall exceed ten feet above ground <br /> level. <br /> f. The monument sign base shall be constructed of materials similar in <br /> appearance to those of the principal structure and shall consist of brick, natural <br /> stone,stucco, textured cast stone, or integrally colored concrete masonry units. <br /> The structure surrounding the face of the sign from the base to the top of the sign <br /> must be solid, continuous, and consist of the base materials or complementary <br /> materials that match the appearance and color of the principal building. <br /> g. The 200 square feet of ground area around the base of the monument sign <br /> shall be landscaped with shrubs or perennials. <br /> 78-1468 regulates signage relating to a specific zone: <br /> 8-3 and I:height. "Within any 8-3 or I district, no sign shall extend in height more than six feet <br /> in height above the highest outside wall or parapet of any principal building. No sign shall be <br /> located closer than ten feet from any property line, except that any sign exceeding ten square <br /> feet may project only two feet into the yard area from any building." <br /> Section 78-707-Setbacks: <br /> B-3 DISTRICT(principal Required(Feet) Proposed(Feet) <br /> structure) _ <br /> Front(Shadywood) 20 151 <br /> Street Side(Shoreline) 20 141 <br /> Street Side(Kelly) 20 5 <br /> Rear(south) 30 28 <br /> Sign Side) 10 0.00 <br />