Laserfiche WebLink
11 <br /> 3.1 LOCATION AND CLEARANCES <br /> V�\VA' \A Ami V°�vim\ Ao. I A A.- �A �V A- ��� OA EN <br /> "\ ,, \ .Z \\y\O ,.,,\ate\\ ..,,' <br /> v rvv <br /> DO NOT INSTALL INTO ANY AREA HAVING A HEIGHT LESS THAN 8 FEET(2.4M)(CEILING OF <br /> ENCLOSURE TO APPLIANCE BOTTOM,EXCLUDING HEARTH HEIGHT). <br /> JMPORTANT <br /> This appliance,fully dressed,weighs 1400lbs(635kg). Ensure there is adequate floor support for the <br /> appliance,chimney and facing material.Some material could weigh thousands of pounds. <br /> We recommend that the appliance be secured to the floor in all cases. <br /> Using the door opening as a datum, level the appliance by shimming underneath the appliance. Bend the tabs <br /> down and secure the appliance to the floor. <br /> 'O <br /> CD•A <br /> TABS <br /> 3.1.1 VENTILATION OPENINGS <br /> The appliance enclosure should be provided with sufficient air circulation to avoid a fire hazard. Install <br /> ventilation grilles (minimum openings of 40 sq. inches(0.03 sq. meters)at both floor and ceiling levels of the <br /> enclosure.These grilles must not restrict the flow of heat by more than 25%. Do not install into any area having <br /> a height less than 8 ft(2.4m) (ceiling of enclosure to appliance bottom, excluding hearth height).The location <br /> of windows, doors and the traffic flow in the room where the stove is to be located should be considered. If <br /> possible,you should choose a location where the chimney will pass through the house without cutting a floor <br /> or roof joist. <br /> W415-1642/04 15 16 <br />