Laserfiche WebLink
g. Efficiency: Motor efficiency shall meet or exceed efficiency requirements for rebate program of local <br /> utility and meet or exceed efficiency requirements as listed below. Motors shall be tested in accordance <br /> with IEEE Standard 112,test method B: <br /> EPAct`92 <br /> (Effective October 25,199') <br /> NOMINAL FULL LOAD EFFICIENCY-NEMA 12-6C <br /> ODP TEFC <br /> Number of Poles 1200 1800 3600 1200 1800 3600 <br /> Motor Horsepower <br /> 1 80.0 82.5 X 80.0 82.5 75.5 <br /> 1.5 84.0 84.0 82.5 85.5 84.0 82.5 <br /> 2 85.5 84.5 84.0 86.5 84.0 84.0 <br /> 3 86.5 86.5 84.0 87.5 87.5 85.5 <br /> 5 87.5 87.5 85.5 87.5 87.5 87.5 <br /> 7.5 88.5 88.5 87.5 89.5 89.5 88.5 <br /> 10 90.2 89.5 88.5 89.5 89.5 89.5 <br /> 15 90.2 91.0 89.5 90.2 91.0 90.2 <br /> 20 91.0 91.0 90.2 90.2 91.0 90.2 <br /> 25 91.7 91.7 91.0 91.7 92.4 91.0 <br /> 30 92.4 92A 91.0 91.7 92.4 91.0 <br /> 40 93.0 93.0 91.7 93.0 93.0 91.7 <br /> 50 93.0 93.0 92A 93.0 93.0 92.4 <br /> 60 93.6 93.6 93.0 93.6 93.6 93.0 <br /> 75 93.6 94.1 93.0 93.6 94.1 93.0 <br /> 100 94.1 94.1 93.0 94.1 94.5 93.6 <br /> 125 94.1 94.5 93.6 94.1 94.5 94.5 <br /> 150 94.5 95.0 93.6 95.0 95.0 94.5 <br /> 200 94.5 95.0 94.5 95.0 95.0 95.0 <br /> B. Manufacturer. Subject to compliance with requirements, provide products from one of the manufacturers listed <br /> below: <br /> 1. General Electric <br /> 2. Century <br /> 3. Baldor <br /> 4. Marathon <br /> 5. Reliance <br /> 6. Emerson <br /> 7. Siemens <br /> 2.02 STARTERS,ELECTRICAL DEVICES,AND WIRING: <br /> A. General: Packaged equipment furnished by the Mechanical Contractor that includes electrical components shall <br /> conform to all requirements as specified in Division 16 and as indicated herein. <br /> B. Motor Starter Characteristics: <br /> 1. Enclosures: NEMA 1, general purpose enclosures with padlock ears, except in wet locations shall be NEMA <br /> 3R with conduit hubs,or units in hazardous locations which shall have NEC proper class and division. <br /> 2. Type and size of starter shall be as recommended by motor manufacturer and the driven equipment <br /> manufacturer for applicable protection and start-up condition. <br /> 15030-3 No.99132-CP2 <br />