Laserfiche WebLink
1.05 PRODUCT DELIVERY,STORAGE AND HANDLING <br /> A. On delivery to job site,place materials protected from weather. <br /> B. Store materials above ground on framework or blocking and cover with protective waterproof covering providing <br /> for adequate air circulation or ventilation. <br /> 1.06 COORDINATION <br /> A. Coordinate the furnishing and setting of all inserts. <br /> B. Notify other trades sufficiently in advance of setting formwork to allow for timely delivery of inserts. <br /> PART 2: PRODUCTS �► <br /> 2.01 CONCRETE FORMS �+ <br /> A. Except for metal forms,use new materials. Materials may be re-used during progress of the Work, provided they <br /> are completely cleaned and reconditioned, re-coated for each use, and capable of producing formwork of the <br /> required quality. <br /> B. For footings and foundations, use metal forms or Douglas Fir boards or planks secured to wood or steel stakes, <br /> substantially constructed to shapes indicated and to support the required loads. <br /> C. For studs,walls,and supports,use Standard grade or better Douglas Fir,dimensions as required to support the loads <br /> but not less than 2"x 4". <br /> D. Wall Forms: <br /> 1. Exposed concrete surfaces: <br /> a. Use 3/4" minimum thickness Douglas Fir plywood, APA grade BB, class I or II, exterior, sanded both <br /> sides,complying with PS-1. <br /> b. Seal edges and coat both faces with colorless coating which will not affect application of applied <br /> finishes. <br /> c. Furnish in largest practicable sizes to minimize number of joints. <br /> 2. Concealed concrete surfaces: <br /> a. use sound,clean plank,boards plywood or metal forms. <br /> E. Column and Pier Forms: <br /> 1. For square or rectangular columns,use 2"thick Douglas Fir planks or joists,surfaced one side and two edges, <br /> or use metal forms. <br /> 2. Construct column forms with right joints and securely clamped together with steel clamps. <br /> F. Use reusable metal curb forms standard to local authority. <br /> G. Do not use earth cuts as forms for vertical surfaces,except as noted herein. <br /> 03100-2 No.99132-CP2 <br />