Laserfiche WebLink
B. Plastic Laminate: <br /> 1. Products by Wilsonart, Formica, Westinghouse, Pionite and Nevamar are acceptable. Architect reserves the <br /> right to select from any of the above manufacturer's if a specific color is not noted in the material finish/color <br /> schedule. <br /> 2. Exposed vertical cabinet surfaces,cabinet bottoms, shelving and other storage surfaces: High pressure plastic <br /> laminate,0.030"thick,meeting NEMA LD3-1991 GP 28 standards including thickness. <br /> 3. Countertops: High pressure plastic laminate,0.050"thick,matte textured finish. <br /> 4. High pressure cabinet liner: .020"in thickness,meeting NEMA LD3-1991 Grade CL-20. Balance with high <br /> pressure cabinet liner at other semi-exposed,and concealed locations. <br /> 5. Semi-exposed cabinet interiors behind doors and drawers, except storage shelves, and underside of wall <br /> cabinets: Melamine resin impregnated sheet, min_finum 80 grams/sq. minimilm permanently bonded to <br /> substrate,meeting NEMA LD3.3-1991 GP28 standards and NEMA LD3-1991 CL20 standards. Balance with <br /> same melamine at other semi-exposed locations, balance with phenolic resin saturated overlay at concealed <br /> locations. <br /> 6. Color: See Material Finish/Color Schedule Section 1-4 of Details of Construction. <br /> C. Edging <br /> 1. Countertops and shelving: Plastic laminate self edge,color and grade to match horizontal surface. <br /> 2. Cabinet body edges: Self edged color and grade to match vertical surface. <br /> 3. Cabinet doors and drawers: 3mm thick"flat edge" solid,high impact color thru, acid resistant P.V.C.applied <br /> with hot melt adhesive, trimmed and buffed. Color: See Material Finish/Color Schedule, Section 1-4 of <br /> Details of Construction. <br /> D. Hardware <br /> 1. Hinges <br /> a. Heavy duty,five knuckle 2-3/4" institutional type hinge. Mill ground,hospital tip,tight pin feature with <br /> all edges eased. Hinge to be full wrap around type of tempered steel.095 inch thick. Each hinge to have <br /> n ininalm nine screws,#7,5/8"FHMS to assure positive door attachment. <br /> b. One pair per door to 48"height. One and one-half pair over 48 inches in height.Hinge to accommodate <br /> 13/16"thick laminated door,and allow 270 degree swing. <br /> C. Finish to be'LH-301 dull chrome for fixed cabinetry. <br /> 2. Pulls: ABS plastic, semi-recessed. Size 5'/4"x 1-3/4" similar to LSI LH-331,Trimline Systems Design Corp. <br /> or Hardware Concepts,Opalocka,Florida. Color: See Material Finish/Color Schedule,Section 1-4 of Details <br /> of Construction. <br /> 3. Sliding Door Hardware <br /> a. Sliding glass doors 1/4 inch thick: LH-370 double track rolling door assembly. <br /> b. Sliding glass doors, 3/4" thick stile and rail type: LH-372 top mounted track with dual roller hangers. <br /> Vertical adjustment for accurate alignment. <br /> 06401-3 No.99132-CP2 <br />