Laserfiche WebLink
PART 3: EXECUTION ' <br /> 3.01 ERECTION <br /> A. All Framing Members: Cut squarely or at an angle to fit squarely against abutting members; held in position until ' <br /> properly fastened. Prefabricated panels: Square, braced against racking. Attachment of similar components: By <br /> Welding. Attachment of dissimilar components: By welding,screw attachment or bolting. Wire tying of framing <br /> components in structural applications shall not be permitted.Adjust welding amperage to prevent bum through. ' <br /> B. Track: Securely anchored to floor,overhead structure or structural backup member. <br /> C. Studs: Seated squarely in track with stud web and flange abutting track web,plumbed or aligned,securely attached ' <br /> to flanges or web of both upper and lower tracks. <br /> D. All Welds: Fillet,plug,butt or seam ' <br /> E. For walls up to 10 ft.high provide one row of bridging at mid-height. <br /> F. For walls over 10 ft.high provide bridging rows spaced 4'-0"o.c.maximum. ' <br /> G. All Wall and Fascia Panels: Diagonally braced with 2 inch x 16 gauge strap; field weld both edges to track and <br /> each stud. ' <br /> END OF SECTION 05400 <br /> 1 <br /> 1 <br /> 05400-2 No.99132-CP2 ' <br />