Laserfiche WebLink
ENERGY CODE DESIGN BY ACCEPTABLE PRACTICE <br /> To Determine Compliance with the Minnesota Energy Code <br /> (Section 602 of the State Amended 1983 Model Energy Code) <br /> This form is only applicable to detached one-and two-family dwellings. The requirements herein are based on Table <br /> No. 6-11 in lieu of the criteria specified in Sections 602.2.1,.2 and .3. <br /> Building Address <br /> Contractor or Owner <br /> Buildina Element "R" Values Area (so ft) % of Ext. Walls <br /> Ceilings Design Sg Req'd 38 <br /> Walls (exterior) Design Za Req'd 20 <br /> (w/o fdn) <br /> Floors (over unheated spaces) Design Req'd 20 ReAN -, <br /> *Windows (in Bldgs w/o Design Req'd 12 <br /> sliding glass door) (glass) <br /> *Windows (in bldgs with a Design Req'd 10 <br /> sliding glass door) (glass) <br /> Foundation Walls Design Req'd 5 (when insulating full depth of foundation wall) <br /> Design Req'd 10 (when insulating only to frost depth and <br /> footings extend below) <br /> Slab-on-grade floors Design Req'd_(See Figure No. 3) <br /> **Doors (1-3/4" metal faced) Design Req'd 3 <br /> * All windows shall be double glazed or have storm windows <br /> ** Conventional doors other than metal require a storm door <br /> CERTIFICATION <br /> I hereby certify that I have completed the above information and that it complies with the Minnesota State Energy <br /> Code. <br /> Signature Date <br /> BCSD 3-89 <br /> CC/SM/6593 <br /> 19 <br />