Laserfiche WebLink
, <br /> , <br /> , Anchor post in concrete by means of pipe sleeves preset and anchored into <br /> concrete. After posts have been inserted into sleeves, fill annular space <br /> between post and sleeve solid with non-shrink, non-metallic �rout, mixed and <br /> ' placed to comply with grout manufacturer's directions. -� <br /> Cover anchorage joint with a round steel flange welded to post. <br /> � - <br /> ' <br /> � <br /> ' ' <br /> Expansion Joints: Provide expansio� joints at locations indicated, or if not <br /> ' indicated, at intervals not to exceed 40 feet. Provide slip joint with internal sleeve <br /> extendinR 2" beyond joint on either side; fasten internal sleeve securely to one side; <br /> locate joint within 6" of posts. <br /> ' <br /> � • � <br /> 3.03 ADJUST AND CLEAN: <br /> ' Touch-Up Paintin�: Immediately after erection, clean field welds, bolted connec- <br /> tions, and abraded areas of shop paint, and paint exposed areas with same material <br /> ' as used for shop painting. <br /> Apply by brush or spray to provide a minimum dry film thickness of 2.0 mils. <br /> � <br /> , END OF SECTION OSS00 <br /> ' <br /> ' , <br /> METAL FABRICATIONS OS500 -3� <br /> ' <br /> � <br />