Laserfiche WebLink
. . <br /> .� .• ,, <br /> S. sy tem Specifications <br /> Pum� Tank: <br /> • A 2.5 inch electrical conduit is to be used for the pump cords <br /> • The piping is to accessible from ground level for future repair <br /> • The supply line leaving the tank is to be sleeved over any <br /> excavated ground in 4" sch 40 PVC and sealed with a 4x2 Fernco <br /> • The floats are to be installed on a float tree <br /> • The pump must be placed on a pump block <br /> • A minimum of a 1/4" drainback hole must be drilled in the supply <br /> line to avoid freezing <br /> Plastic bolt down manhole covers are to be used and left at grade level <br /> for maintenance access. <br /> Pressure rate glue j oint fittings must be used. <br /> If the septic tanks are less than 2' deep the covers are to be insulated <br /> with 2" hi -densitX foam <br /> It is the installer's responsibility that all sewerlines leaving the structure <br /> have been connected to the new system <br /> There will be a 2000 Gallon 2 compartment tank installed to serve on <br /> restroom in the proposed barn. <br />