Laserfiche WebLink
Sec. 78-1681.- Driveways, in general. <br /> All driveways shall comply with the following minimum dimensional standards: <br /> (1) Driveways serving end loading garages shall maintain a width equivalent to the width of all <br /> overhead doors extending 15 feet out from the garage doors. <br /> (2) Driveways serving side loading garages shall provide a minimum turn around or back up depth <br /> of 20 feet, as measured from the garage door(s). <br /> (3) Minimum driveway taper ratio shall be 2:1. <br /> (4) Driveways shall be at least eight feet in width at the street or private road. <br /> (5) A turnaround shall be provided for a driveway with direct access to an arterial or collector <br /> roadway, or for a side load garage as determined necessary by the city planner. The minimum <br /> dimensions of the turnaround shall be eight feet in width by 12 feet in depth. <br /> (6) "Wheel strip" driveways are allowed, but the entire width of the driveway(from outside to outside <br /> of the strips)will be considered hardcover. <br /> Drawing 1 is included for illustrative purposes. <br /> Drawing 1: Minimum Driveway Standards <br /> �-� s� � <br /> Backup Apron <br /> m (lf Req�iied) <br /> Sk8'Mirim�m <br /> Gar2qe <br /> 0 <br /> � �S m <br /> i8 <br /> Slde Load E �, <br /> �� <br /> = Aqon Depth 20'Min. <br /> End load <br /> 4'Rad <br /> MiNmum W�dth d (hin� <br /> Garaqe Doa <br /> �E � <br /> y, u <br /> �r � <br /> � -------------- � <br /> Min�mum Taper E Dnveway�Yidth <br /> _z-1__ JZ � 8.Minim�m <br /> � (20'Mawmum) <br /> DrnrewaY Wd� 1 M <br /> 6'Mmmum <br /> 5'Rad. 5'Rad. <br /> (20'Max�rtK:m)--,..—a., Edqe of tLqht-OF-waY <br /> � � (�ot unel <br /> { � <br /> � � <br /> Minimum Driveway Standards <br /> Page 1 <br />