Laserfiche WebLink
h� <br /> 1.05 QUALITY ASSURANCE <br /> A. Perform work in accordance with SWRI requirements for materials and installation. <br /> B. Perform acoustical sealant application work in accordance with ASTM C919. <br /> 1.06 ENVIRONMENTAL REQUIIZEMENTS <br /> A. Maintain temperature and humidity recommended by the sealant manufacturer <br /> during and after installation. <br /> 1.07 COORDINATION � <br /> A. Coordinate work under provisions of Section 01100. <br /> B. Coordinate the work with all sections referencing this section. <br /> 1.09 WARRANTY � <br /> A. Provide five year warranty under provisions of Section 01700. <br /> PART 2 PRODUCTS ,� <br /> 2.01 SEALANTS � <br /> A Urethane Sealant: Shall conform to ASTM C 920, Type S or M, Grade NS, Class <br /> 25, uses: NT, M, A and O. (Type A) <br /> B. Sanitary Silicone Sealant: Single component silicone, conforming to ASTM C 920, � <br /> Type S, Grade NS, Class 25. (Type B) <br /> C. Silicone Sealant: Single component, non-sag, Type 2, Class A(for sheet metal <br /> work). (Type C) � <br /> D. Butyl Sealant: Single component, Type 1 (for use in setting thresholds). (Type D) <br /> E. Acrylic Latex: (interior use only) Single component, non-sage type. (Type E) <br /> 2.02 MANUFACTURERS � <br /> A. Type A: Pecora Dynatrol I, Sonneborn Sonolastic NP 1. <br /> B. Type B: Pecora 863, Tremco Proglaze. � <br /> C. Type C: Dow Corning 999-A. <br /> D. Type D: Tremco Butyl Sealant, Pecora BC-158. <br /> E. Type E: Tremco Acrylic Latex 834, Pecora AC-20. <br /> F. Substitutions: Under provisions of Section 01300. <br /> 2.03 ACCESSORIES <br /> A. Primer: Non-staining type, recommended by sealant manufacturer to suit <br /> application. <br /> B. Joint Cleaner: Non-corrosive and non-staining type, recommended by sealant � <br /> manufacturer; compatible with joint forming materials. <br /> Division 7—Section 07900 <br /> �y, <br /> Page 2 of 3 <br /> � <br />