Laserfiche WebLink
� <br /> 2.04 FABRICATION, continued . <br /> E. Head and Sill Flashings: Roll formed to required shape, single length in one piece <br /> per location. <br /> F. Screens: Install screen mesh in shaped frame, reinforce corner construction, shop <br /> install to louver with fasteners. <br /> 2.05 FII�TISHES <br /> � A. Exterior Aluminum Surfaces: Prepainted finish. <br /> B. Interior Aluminum Surfaces: Unfinished. <br /> _� <br /> PART 3 EXECUTION <br />� 3.01 EXAMINATION <br /> A. Verify site conditions under provisions of Section 01039. <br /> B. Verify that prepaxed openings and flashings are ready to receive work and opening <br />� dimensions are as indicated on shop drawings. <br /> C. Verify that electric power is available and of the conect characteristics. <br />�� 3.02 INSTALLATION <br /> A. Install louver assembly in accordance with manufacturer's instructions. <br /> B. Install louvers level and plumb. <br /> C. Install flashings and align louver assembly to ensure moisture shed from flashings <br />�� and diversion of moisture to exterior. <br /> D. Secure louvers in opening framing with concealed fasteners, removable for <br /> maintenance purposes. <br /> E„� E. Install bird and insect screen and frame to interior of louver. Hinge screens for <br /> access. <br /> F. Install insect screen and frame to intake and exhaust louvers. Install bird screens to <br /> �� exhaust and intake louvers. <br /> G. Install perimeter sealant and backing rod in accordance with Section 07900. <br /> 3.03 ADJUSTING <br /> A. Ad'ust work under rovisions of Section 01700. <br /> B. Adjust operable louvers for freedom of movement of control mechanism. <br /> Lubricate operating joints. <br /> 3.04 CLEANING <br /> A. Clean work under provisions of 01700. <br /> B. Strip protective finish coverings. <br />�� C. Clean surfaces and components. <br />�� Division 10-Section 10211 <br /> Page 3 of 4 <br />