Laserfiche WebLink
,� <br /> {'. <br /> 3.03 JOINT TREATMENT <br /> A Tape, fill, and sand exposed joints, edges, and corners to produce smooth surface <br /> ready to receive fimshes. <br /> B. Feather coats orrto adjoining surfaces so that camber is maximum 1/32 inch. <br /> C. Taping, filling, and sanding is not required at surfaces behind adhesive applied to <br /> ceramic tile. <br /> D. Tape joints and corners of cementitious backing board. <br /> 3.04 TEXTURE FINISH <br /> A. Spray apply finish te�rture coating in accordance with manufacturer's instructions. � <br /> END OF SECTION � <br /> �� <br /> � <br /> i� <br /> � <br /> ,� <br /> �� <br /> �; <br /> .� <br /> Division 9-Section 09260 � <br /> Page 4 of 4 <br /> :� <br />