Laserfiche WebLink
<br /> Page 1 <br />Council Exhibit C <br /> <br /> <br /> <br />Sec. 78-1468. - Signs in B and I districts. <br />Within the B and I districts, wall and monument signs are permitted subject to the following regulations: <br />(1) B-1, B-2 and B-4: size. Within the B-1, B-2 and B-4 districts, the aggregate square footage of sign <br />space per lot shall not exceed the sum of one square foot for each front foot of building, plus one <br />square foot for each front foot of lot not occupied by a building. No individual sign shall exceed <br />50 square feet. <br />(2) B-3: size. Within the B-3 district, the aggregate square footage of sign space per lot shall not <br />exceed the sum of four square feet per front foot of building, plus one square foot per front foot <br />of property not occupied by a building. No individual sign surface shall exceed 100 square feet . <br />(3) I: Within the I District, signs shall be permitted according to the regulations in section 78-832. <br />(4) B-1, B-2 and B-4: height. Within the B-1, B-2 and B-4 districts, no sign shall extend in height more <br />than two feet above the highest outside wall or parapet of any principal building, nor shall any <br />sign be located closer than ten feet from any property line; except that any sign over ten square <br />feet may project two feet into any required yard area from the principal building. <br />(5) B-3 and I: height. Within any B-3 or I district, no sign shall extend in height more than six feet in <br />height above the highest outside wall or parapet of any principal building. No sign shall be located <br />closer than ten feet from any property line, except that any sign exce eding ten square feet may <br />project only two feet into the yard area from any building. <br />(Code 1984, § 10.61(3); Ord. No. 6 3rd series, § 2, 4-26-2004; Ord. No. 32 3rd series, § 5, 3-27- <br />2006)