Laserfiche WebLink
� <br /> '` FILE#13-3589 <br /> 15 Jan 2013 <br /> Page 3 of 9 <br /> of products that produces no exterior noise, glare,fumes, obnoxious products, byproducts or <br /> wastes, or creates other objectionable impact on the environment. These shall include the <br /> following: a. Manufacturing, compounding, assembly,packaging, treatment orstorage of <br /> products and materials. Expressly prohibited activities shall include:the stockpiling and recycling <br /> of aggregate materials or supplies of more than 25 cubic yards."The proposed manufacturing <br /> use appears to meet the criteria of this permitted use. <br /> Lot Area/Width. Buildin�Height.Setbacks.Lot Coverage: <br /> Required Existing/Proposed Code <br /> Compliant? <br /> Lot Area 40,000 s.f. min. 74,680 sq.ft. (1.72 acres) Yes <br /> Lot Width 200 feet min. 233' Yes <br /> Front Yard Setback (W) 35' min. 91.8' Yes <br /> Rear Yard Setback (E) 20' min. 28' Yes <br /> Side Street(Major)Setback (S) 35' min. 40' Yes <br /> Side Yard Setback(N) 10' min. 16' Yes <br /> Building height 3 stories/40' max. 28' Yes <br /> Lot coverage by structures 45%a max. 43.8% Yes <br /> Impervious area 85%max. 80.9%(proposed future 65%) Yes <br /> Buildin�Desi�n and Construction <br /> Section 78-826 establishes standards for building design and construction. The applicants � <br /> propose to construct a small, infill addition onto the southwest end of the existing building. The <br /> applicants propose to construct the addition with the same fa�ade materials and color scheme <br /> as the existing building,with the intent to have visually seamless facades that will appear to <br /> have been part of the original construction. <br /> In terms of building design and construction standards, see the following table: <br /> Code Requirement Complies? <br /> Rooftop Equipment: Rooftop equipment shall be screened Review with applicant-no <br /> from view from the ground at the property line with vertical rooftop equipment is shown <br /> extensions of the building walls or with parapets or other on the plans submitted. <br /> architectural design features of the same materials used on <br /> the walls of the building.Where the topography permits, it is <br /> desirable to screen such equipment from adjacent property, <br /> but it is not the intent of this requirement to increase the <br /> height of the screening significantly above that of the <br /> equipment in order to screen it from view from tall buildings <br /> or from higher ground. <br /> Form.Scale and Proportion:The form and proportion of Yes <br /> buildings shall be consistent or compatible with the scale, <br /> form and proportion of existing development in the <br /> immediate area. <br />