Laserfiche WebLink
(2) Driveways serving side loading garages shall provide a minimum turn around or <br /> back up depth of 20 feet, as measured from the garage door(s). <br /> (3) Minimum driveway taper ratio shall be 2:1. <br /> (4) Driveways sha11 be at least eight feet in width at the street or private road. <br /> (5) A turnaround sha11 be provided for a driveway with direct access to an arterial or <br /> collector roadway, or for a side load garage as determined necessary by the city <br /> planner. The minimum dimensions of the turnaround shall be eight feet in width <br /> by 12 feet in depth. <br /> (6) "Wheel strip" driveways are allowed,but the entire width of the driveway(from <br /> outside to outside of the strips)will be considered hardcover. <br /> The following drawing is included for illustrative purposes: [Drawing 3]. <br /> (e) Compliance. <br /> (1) It is unlawful to convert, enlarge, or alter any structure or use any structure in a <br /> manner that violates the hardcover limitations. <br /> (2) Nonconforming hardcover may not be relocated or expanded in any way unless <br /> the property is brought into conformance except: <br /> a. A roofline may be changed but the roof may not be extended over <br /> unroofed portions of the structure. <br /> b. An additional story may be added over roofed portions of a structure. <br /> c. An open or screened porch may be converted into a two or three season <br /> porch or year round living space (including replacing a post foundation <br /> with a perimeter foundation) provided hardcover is not increased. <br /> (3) This section is independent of lot coverage regulations in the city Code. <br /> Accordingly, a property must conform to both hardcover and lot coverage <br /> regulations. � <br /> (Ord.No. 101 2nd series, § 1(10.56(16)(L)), 2-24-1992; Ord.No. 59 3rd series, § 3, 5-11-2009) <br />