Laserfiche WebLink
� <br /> r �ertainTeed �-1 � <br /> Builders Statement InsulSafe° SP <br /> Fiber Glass Blowing Insulation <br /> � t ,� � � ( � �. ,�,��' �.�;�-<��=t <br /> Homeowner Name/Jobsite Name <br /> �'����-' � � ,�c.� � � 3��r <br /> Home Address <br /> n�� ��--�, �u,�� ��s--�.,._ �,�,, ��_ C�''- �y <br /> Installer/Contractor(sign) Company Name Date <br /> Builder(sign) Company Name Date <br /> Inspected By(sign if required) Date <br /> OPEN ATTIC APPLICATION <br /> MINIMUM MAXIMUM NET SQ.FT. MINIMUM WEIGHT- MINIMUM MINIMUM <br /> R-VALUE BAGS PER 1000 SQ.FT. PER BAG COVERAGE POUNDS PER S�.FT. INSTALLED THICKNESS SETTLED THICKNESS <br /> To obtain a Bags per Contents of bag Weight per sq.ft.of Installed insulation Minimum settled insulation <br /> thermal resistance 1000 sq.ff. shall not cover installed insulation shall shall not be less than: shall not be less than: <br /> (R)of: of net area: more than:(sq.ft.) not be less than:(Ibs.) (in.) (in.) <br /> 60 31.4 31.9 0.972 22.00 22.00 <br /> 49 25.2 39.7 0.780 15.50 18.50 <br /> 44 22.4 44.6 0.695 16.75 16.75 <br /> 38 19.1 52.5 0.591 14.50 14.50 <br /> 30 14.9 67.1 0.462 11.75 17.75 <br /> 26 12.8 77.9 0.398 10.25 10.25 <br /> 22 7 0.8 92.9 0.334 8.75 8.75 <br /> 19 9.3 107.4 0.289 7.75 7.75 <br /> 13 62 161.7 0.192 525 525 <br /> 11 5.3 190.5 0.163 4.50 4.50 <br /> R-VALUE THICKNESS NET AREA(S�.FT.) INSULSAFE SP(✓) BAGS USED BATTSIROLLS(✓) <br /> CEILINGS `-f l� f� /`, L �� �i✓� C !� Y .�/� <br /> L <br /> WALLS <br /> FLOORS <br /> THERMAL PERFORMANCE-ATTIC BLOWING APPLICATION <br /> • In accordance with the chart above,you must install the minimum number of bags per 1,000 sq. ft. of net area for each <br /> R-Value listed. <br /> • The maximum net coverage must not exceed that specified for each R-Value. <br /> • The insulation must be installed at or above the specified installed thickness for each R-Value. <br /> • Failure to install the required minimum weight per sq. ft. of insulation at or above the initial installed thickness will result in <br /> reduced R-Value. <br /> • This product should not be mixed with other blown insulations or the thermal claims will become invalid. <br /> DANGER: RECESSED LIGHT FIXTURES-TO PREVENT OVERHEATiNG, DO NOT INSULATE ON TOP OR WITHIN 3" OF <br /> SUCH DEVICES.THIS WARNING DOES NOT aPPLY TO TYPE IC LIGHT FIXTURES OR TO FLUORESCENT <br /> FIXTURES WITH THERMALLY PROTECTED BALLASTS. <br /> 002007 CertainTeed Corporation A Saint-Gobain Company 30-24-298 Builders Statement 2/07 III <br /> II I <br />