My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
Septic design-2016
Orono
>
Property Files
>
Street Address
>
C
>
Chippewa Lane
>
4220 Chippewa Lane - 31-118-23-42-0012
>
Septic
>
Septic design-2016
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
8/22/2023 4:32:22 PM
Creation date
5/18/2016 3:03:27 PM
Metadata
Fields
Template:
x Address Old
House Number
4220
Street Name
Chippewa
Street Type
Lane
Address
4220 Chippewa Lane
Document Type
Septic
PIN
3111823420012
Supplemental fields
ProcessedPID
Updated
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
26
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
INSPECTOR CHECKLIST - mound <br /> 4LLU(.hppewa Lane, Urono <br /> � WELI, setbacks: 20'to pressure tested sewer line (5 psi for 15 min) <br /> 50'to everything 100'to dispersat area with shaltow well <br /> PROPERTY LINES setback: 10'to everything <br /> Road setback: outer ditch, or 33'from center of township road, or 65'from center of cnty road <br /> I.AKE/BLUFF setback: 20'for bluff. Lakes: GD_, RD_, NE_. Protected wetland_. <br /> Building setbacks: 10'for everything, 20'for dispersat area. <br /> WATER LINE under pressure se 10'to bed,tank �t sewer line. (else sewer line > 12" below) <br /> � Sewer line Et baffle connection (no 90's, 3' between 45's, slope min 1"in 8', max 2"in 8') <br /> (no depth req's, clean out every 100', Sch 40 D2665 or F891) <br /> � Septic tank and risers (water tight, insulated, proper depth, existing verified by pumping) <br /> mfg 2500 gallons none <br /> Riser over outlet, riser over inlet or center, and 6"+ inspection pipe over any remaining baffles. <br /> yes effluent filter Fx alarm <br /> Dose tank risers and piping (water tight, insulated, proper depth, drainback) <br /> mf� 1500 gallons <br /> � dose pump 36 gpm 15 head VERIFY PUMP CURVE 4.4 min ON 7.2 hr OFF <br /> � float setting drop 4.3 inches at 36.8 gpi "DESIGNED" 3.2 inches approx float tether length <br /> 157.0 gal dose divided by gpi "INSTALLED" = inches float drop (field corrected <br /> LABEL pump requirements and drawdown on riser or panet <br /> Cam lock reachable from grade - 30" max. J-hook weep hole. Supply line access (no hard 90's) <br /> supply pipe sloped 1/8"+, supported by sch40 sleeve, and buried 6"+. <br /> splice box / control panel / electrical connections <br /> flow measurement: CT, ETM, time dosed, home water meter <br /> mound absorption area rough up <br /> mound rock dimensions 10.0 X 63.0 <br /> Sand lift depth 12 inches. (Jar test : 2"sand leaves < 1/8"silt after 30 min) <br /> � Absorption Sand beyond rock 0.0 upslope 14.0 downslope <br /> � Bermed topsoil beyond rockbed 9 upslope 15 sideslope 22 downslope <br /> cover depth of 12-18"+ VERIFY <br /> 3 laterals (1-2'from edge of rock) <br /> 2.00 inch pipe size <br /> 3.0 ft lateral spacin� <br /> 8 7/32 inch perforations <br /> 3.0 ft perforation spacing <br /> Air inlet at end of laterals, and at top feed manifold if necessary. VERIFY <br /> clean outs (no hard 90's) <br /> 4" inspection pipe to bottom of rock, anchored VERIFY <br /> Abandon existing system - if necessary �Re-use existing tank certification <br /> monitoring plan and type <br /> well abandonment form - if necessary <br />
The URL can be used to link to this page
Your browser does not support the video tag.