Laserfiche WebLink
Page 3 of 6 ER-4663 <br /> EX�iIBIT A <br /> (EIF'S CONTRACTOR NAME) <br /> Completion Date: <br /> THE EXTERIOR INSULATION AND FINISH SYSTEM (EIFS) INSTALLED ON TI-IE STRUCTiJRE LOCATED.AT THE <br /> ADDRESS INDICATED BELOW: <br /> CONFORMS <br /> 1'O(EIFS MANUFACTURER NAME)RECOMMENDED INSTALLATION PRAC'CICES AND SECTION(S) OF <br /> ICBO ES,INC.,REPORT NO. . <br /> Address of Structure: Froduct Component Names: <br /> Adhesive(s) <br /> Fastenecs(mech) <br /> Base Coat <br /> Reinforcing Fabric <br /> Finish Coat(s) <br /> INSTALLATION CONFORMS <br /> A. Substrate Type and Tolerance <br /> B. EIFS <br /> 1.Adhesive and/or Fasteners <br /> 2.Insulation <br /> 3.Reinforcing Fabric <br /> 4.Base Coat <br /> 5.Finish <br /> C. The information entered above is offered in testimony that the EIFS installation conforms with <br /> the EIFS manufacturer's installation methods and procedures,and the EtFS manufacturer's ES <br /> report. <br /> NOTE:An installation card shall be received from the Sealant Installer indicating that the sealant installation conforms with the EIFS <br /> evaluadon report and sealant manufacturer's installation methods and procedures must accompany this declazation. <br /> EIFS Contractor Company Name and Address: <br /> Signature of responsible Officer: <br /> Typed Name and Tide of Officer: <br /> Telephone Number(-) <br /> cc: Original: Building Department (Must be submitted with sealant installer declaradon.) <br /> Copy: EIFS Manufacturer <br />