Laserfiche WebLink
� <br /> MECcheck Inspection Checklist <br /> 1998 IECC <br /> MECcheck Software Version 3.2 Release 1 <br /> DATE: 08/27/O 1 <br /> Bldg. � <br /> Dept. � <br /> Use � <br /> I <br /> � Ceilings: <br /> [ l I 1� Ceiling 1: Cathedral Ceiling(no attic),R-44.0 cavity insulatioa <br /> � Comments: <br /> � <br /> � Above-Grade Walls: <br /> [ ] � 1. Wall 1: Wood Frame, 16"o.c.,R-19.0 cavity insulation <br /> � Comments: <br /> � <br /> � Windows: <br /> [ ] ( 1. Window 1: Vinyl Frame, Double Pane with Low-E, U-factor: 0.400 <br /> � For windows without labeled U-factors,describe features: <br /> � #Panes Frame Type Thermal Break? [ ] Yes [ ] No <br /> � Comments: � <br /> � <br /> � Doors: <br /> [ ] � 1. Door 2: Glass, U-factor: 0.340 <br /> � #Panes Frame Type Thermal Break? [ ] Yes [ ] No <br /> � Comments: <br /> [ ] � 2. Door 3: Solid, U-factor: 0.350 <br /> � Comments: <br /> � <br /> � Floors: <br /> [ ] � 1. Floor 1: All-Wood JoistlTruss,Over Unconditioned Space,R-38.0 cavity insulation <br /> � Comments: <br /> � <br /> � Air Leakage: <br /> � l I Joints,penetrations,and all other such openings in the building envelope that are sources of air <br /> � leakage must be sealed. <br /> [ ] � Recessed lights must be type IC rated and installed with no penetrations or installed inside an appropriate <br /> � air-tight assembly with a 0.5"clearance from combustible materials and 3"clearance from insulation. <br /> I <br /> � Vapor Retarder: � <br /> [ ] � Required on the warm-in-winter side of all non-vented framed ceilings,walls,and floors. <br /> I <br /> � Materials Identification: <br /> ( ] � Materials and equipment must be installed in accordint to the manufacturer's installation instructions. <br /> [ ] � Materials and equipment must be identified so that compliance can be deternuned. . <br /> [ l � Manufacturer manuals for all installed heating and cooling equipment and service water heating <br /> � equipment must be provided. <br /> [ ] � Insulation R-values and glazing U-values must be clearly marked on the building pla�s or specifications. <br /> � <br /> � Duct Insulation: <br /> [ l � Ducts in unconditioned spaces must be insulated to R-5. <br /> 3a� S C�9��.r�A�� (Z- �, <br />