Laserfiche WebLink
G. MOUND SLOPE WIDTH & LENGTH (Greater than 1%) <br /> 1. Downslope absorption width =absorption width minus rock layer width <br /> 20 feet - 10 feet= 10 feet <br /> 2. Calculate mound size <br /> UPSLOPE <br /> a. Determine depth of clean sand at upsiope edge of rock layer= 3 feet minus distance to restricting layer(C1) <br /> 3 ft - 2 ft= 1 feet <br /> b. Mound height at the upslope edge of rock layer=depth of clean sand for separation (G2a) <br /> at upslope edge plus depth of rock layer(1 foot)to depth of cover(1 foot) <br /> 1 ft+ 1 ft+ 1 ft= 3 feet <br /> c. Upslope berm multiplier based on land slope(see figure D-34) <br /> Select berm multiplier of 3.85 <br /> d. Upslope width=berm multiplier(G2c)times upslope mound height(G2b): <br /> 3.85 x 3 ft = 11.0 feet <br /> DOWNSLOPE <br /> e.Drop in elevation=rodc layer width(D2)times percent landslope(C5)I 100 <br /> 10 ft x 1 % 1100= 0.1 feet <br /> f. Downslope mound height=depth of dean sand for slope difference(G2e) <br /> at downslope rodc edge plus the mound height at the upslope edge of rock layer(2b) <br /> 0.10 ft + 3 ft= 3.1 feet <br /> g.DoHmslope berm multiplier based on percent land stope(see Figure D-34) 4•17 <br /> h. Downslope width=downslope multiplier(G2g)times downslope mound height(G2� <br /> 4.17 x 3.1 = 12.9 feet <br /> i. Select greater of G1 and G2h as the downslope width 12.9 feet <br /> j. Total mound width is the sum of upslope(G2d)width plus rock layer width(D2)plus downslope width (G2i) <br /> 11.0 ft+ 10.0 ft+ 13.0 ft= 34.0 feet <br /> k.Total mound length is the sum of upslope width (G2d)plus rock layer Iength(D3) <br /> plus upslope width(G2d) <br /> 11.0 ft + 62.0 ft+ 11.0 ft= 84.0 feet <br /> Final Dimensions (slope>1%) 34.0 ft x 84.0 ft <br /> I hereby ceRify that I have completed this work in accordance with all applicable ordinances, rules and laws <br /> �/% (signature) ���' (license#) _lU��_�U'� (date) <br /> � P e2of6 <br />