2005-P08772 - pool - Laserfiche WebLink

Home Browse Search

Options ASME The RP2100 Digital heater is also available in an ASME version. Raypak has state inspec- tors on-site daily performing certifications for our pool and commercial boiler production that may require ASME. Being in the boiler business for over 50 years truly makes Raypak the leader for your commercial needs. Why ASME? Most local codes require that public �1 pools, pools that are in condominiums, apartments, or other commercial applications be A ASME certified. ASME stands for American Society of Mechanical Engineers. They are a non-profit group which sets many industrial and manufacturing standards. A pool heater that is made to ASME standards must perform to a set of specifications as determined by ASME, specifically in relation to the operating water pressure the appliance can handle. Each and every ASME heat exchanger that goes into a Raypak heater is certified by a state inspector to make sure it complies with all the ASME codes for pool heaters. On-site inspectors Cast Iron Glass-Lined Header Raypak has applied its years of commercial boiler experience to the design of the cast iron glass-lined header. A metal header design allows for the higher working pressures required by ASME. Only after the material meets the stress analysis and metal composi- tion tests is it approved for use in an ASME unit. The Raypak RP2100 ASME gas heater is equipped with .065" wall integral copper finned tubes. This tubing is over 50% larger in wall thickness than standard tubing, providing additional resistance to leakage from chemical corrosion. D-2 Power Vent Raypak offers an optional power vent feature. The D-2 Power Vent assembly is tested and certified to the latest edition of the American National Standard ANSI Z21.56 for pool heaters. Sometimes, equipment rooms or unusual venting configurations require the use ASME code heat exchanger of a power vent. Being the heater experts, we have this option for you when the need may arise. Through-the-Wall Capable The Power Vent assembly is a Category III mechanical draft venting system under a pos- itive static pressure that avoids excessive condensate production in the vent. All sizes are capable of relieving flue gases up to a maximum of 40 equivalent feet of vent length. All models have a standard 4" diameter exhaust connection. Multi-Position �- Using the Raypak supplied adjustable 90°elbow,the flue gases may be discharged in any direction. Or simply attach a vertical vent pipe. The D-2 Power Vent is also dual voltage capable (120/240 volt) and engineered for long life and smooth operation. Factory set for 240 volts. Safety at its Best The Power Vent is equipped with a draft proving switch. This switch insures that the fan is operating and proving draft before firing your heater. It is also equipped with a solid state control that allows the fan to safely exhaust any residual combustion gases in the heater after the heater has shut down. D-2 Power vent For dimensions and technical specifications, see catalog number 6000.20. Ev Raypak, Inc.2151 Eastman Avenue,Oxnard,CA 93030,(805)278-5300.Fax(800)872-9725 • • Raypak Canada Limited 2805 Slough Street,Mississauga,Ontario,Canada L4T IG2.(905)677-7999.Fax(905)677-8036 • www.raypak.com Litho in U.S.A.02003 Raypak,Inc. Catalog No.6000.121 Effective: 11-01-03 Replaces:04-01-03 Raypak reserves the right to change these specifications without notice.