2000-A002002 - new structure - Laserfiche WebLink

Home Browse Search

� � 4. Page 2, Item 3: Permanent locations of heating, ventilation and air conditioning equipment will be shown on drawings submitted for permits for those portions of the project. 5. Page 2, Item 5: Lyman Lumber and Automated Building Components (ABC) are in the process of generating roof truss layout and designs. That information will be forwarded to you when completed. 6. Page 2, Item 5: Refer to the Architectural Drawings for window and door schedules. As noted in Item 4 above, Marvin Windows are scheduled, but the actual window and door manufacturer will be Windsor Windows. Actual unit and rough opening dimensions may vary up to one inch (1"+/-). 7. Page 2, Item 5: The one (1) skylight has been deleted from the project. 8. Page 2, Item 5: Stairways will be custom-fabricated on site. 9. Page 2, Item 6: Please refer to enclosed Exterior Envelope Average "U" Value Computation for individual material and assembly U-values. 10. Page 2, Item 7: PIymouth Plumbing, Heating & Air Conditioning are in the process of generating designs for plumbing and HVAC systems. That information will be turned over to you upon application for permit for those portions of the project. 11 . Page 2, Item 8: Please refer to enclosed Project Manual containing technical specifications for the project. 12. Page 2, Item 8: Please refer to enclosed Exterior Envelope Average "U" Value Computation for material and assembly U-values. 13. Page 3, Item 9: Driveway access will be located at access point for the previous driveway that served the existing residence that was demolished. It is therefore assumed that no permit will be required. 14. Page 3, Item 11 : Refer to hardcover calculations bound into the Application. 15. Page 5, Item 3: Offset stakes will be located when the building is staked on the site. This office has directed the Surveyor to stake the house and the Surveyor stated that such work will be done in the next couple of days. 16. Page 5, Item 8: Elevation at top of curb along North Brown Road has not been indicated. It is the Surveyor's assumption that such a requirement is typically for much smaller parcels. If curb elevation is required, please advise this office, and work will be performed immediately. 17. Page 5, Item 9: Please refer to Land Survey and Architectural Drawings for foundation and floor elevations. 18. Page 5, Item 11 : Elevation at each property corner has not been indicated. Again, it is the Surveyor's assumption that such a requirement is typically for much smaller parcels. Additionally, we will not be grading near property corners, except at driveway near southeast corner. If corner elevations are required, please advise this office, and work will be performed immediately. 19. Page 5, Item 12: Existing structures on adjacent parcels have not been indicated. The Surveyor is unsure if such information is required for this lake parcel. If locations of existing adjacent structures is required, please advise this office, and work will be performed immediately. Such drawing will probably be required to be at a much smaller scale, because some adjacent structures are quite distant from this parcel. 20. Page 5, Item 15: Established high water elevation of Dickey Lake is not shown on the Land Survey, but, as noted on Page 21 of the Application, it is assumed that OHWL is 985.5'. 21 . Page13: Refer to hardcover calculations bound into the Application. 22. Pa es 14 and 15: Refer to enclosed Exterior Envelo e Avera e "U" Value Com utation.