Laserfiche WebLink
07120 Fluid Applied Waterproofing <br /> A. Provide and install exterior waterproofing and insulation at all foundation walls as shown on the Drawings and <br /> specified herein. <br /> B. Waterproofing Materials: <br /> 1. Waterproofing: Single-component, polymer-modified, fluid-applied membrane: <br /> a. °TUFF-N-DRI Basement Waterproofing" (Koch Materials, Inc.). <br /> 2. Insulation/Drainage Board: Nominal 2-3/8 inches thick; unfaced, rigid fiberglass insulation board; R-10: <br /> a. "WARM-N-DRI Foundation Board" (Owens Corning). <br /> 3. Perimeter Foundation Insulation (below Lower Level floor elevation): Extruded polystyrene; minimum 25 <br /> psi compressive strength; tongue and groove edges: <br /> a. Thickness: Two inches (2") <br /> b. R-value: Minimum R-5.0 per inch <br /> c. "Styrofoam Tongue and Groove Brand" (Dow Chemical); or equal <br /> d. Provide at exterior of foundation walls along Lower Level walkout areas. <br /> C. Apply waterproofing over foundation walls when mortar is dry. Install insulation/drainage board over <br /> waterproofing when membrane is still tacky. <br /> , <br /> 633 SPECIFICATIONS <br /> Page 39 <br />