Laserfiche WebLink
Sec. 78-1681. - Driveways, in general. <br />All driveways shall comply with the following minimum dimensional standards: <br />(1) Driveways serving end loading garages shall maintain a width equivalent to the width of all <br />overhead doors extending 15 feet out from the garage doors. <br />(2) Driveways serving side loading garages shall provide a minimum turn around or back up depth <br />of 20 feet, as measured from the garage door(s). <br />(3) Minimum driveway taper ratio shall be 2:1. <br />(4) Driveways shall be at least eight feet in width at the street or private road. <br />(5) A turnaround shall be provided for a driveway with direct access to an arterial or collector <br />roadway, or for a side load garage as determined necessary by the city planner. The minimum <br />dimensions of the turnaround shall be eight feet in width by 12 feet in depth. <br />(6) "Wheel strip" driveways are allowed, but the entire width of the driveway (from outside to <br />outside of the strips) will be considered hardcover. <br />Drawing 1 is included for illustrative purposes. <br />Drawing 1: Minimum Driveway Standards <br />