Laserfiche WebLink
P <br />c <br />C <br />ji <br />r <br />ft <br />r <br />t <br />2341. PLANT- MIXED BITUMINOUS PAVEMENT <br />Specific Requirements <br />2341.0. SPECIFICATION REFERENCE: Section 2.341 of the State of Minnesota, <br />Department of Transportation, "Standard Specifications for Highway Construc- <br />tion", dated 1983 Edition, and all amendments thereto, shall apply except as <br />modified or altered in the following Specific Requirements. <br />2331.1. DESCRIPTION: This work shall consist of the: construction of a plant - <br />mixed wear course over a bituminous leveling course. The wear course small ht• <br />1� inches compacted thickness as shown on the typical section. <br />2341.3.2. Proportioning: The percentage of weight of bitumen is estimated at <br />6.0% for they wear course. <br />2341.3. CONSTRUCTION REQUIREMENTS: The contractor shall feather the <br />bituminous overlay back into all driveways, cross streets and at the beginning <br />and end of the project as directed by the Engineer. The driveways and streets <br />shall be milled down 3/4 inch by 10 feet wide across the full width. The <br />milling shall be incidental to the bituminr—a wearing course mixture as bid in <br />the proposal. <br />2341.3.3. Treatment of Surface: The bituminous hinder course shall receive a <br />tack coat of 0.05 gals./sq.yd., prior to placement of the wear course unless <br />otherwise directed by the Engineer. <br />0-8074c <br />Copyright 1985 <br />Bonestroo, Rosene, Anderlik <br />4 Associates, Inc. <br />