Laserfiche WebLink
Mr. Doug Johnson <br />Page 2 <br />June 29. 1988 <br />4) On the outside bearing wall, erect a concrete form on the inside at <br />least 4 inches from the inside of the outside wall. <br />5) On the outside and inside bearing walls, pour at least a 6" to 8" <br />cap (minimum) on top of the wall. A greater height could be built <br />if desired. <br />6) Reinforce the 4" added wall with #4 rebars 12" on center in both a <br />horizontal and vertical direction. <br />7) Place 244 rebars (continuous) at the top in the cap and 244 rebars <br />(continuous) at the bottom of the concrete cap regardless of the <br />height of the cap. <br />8) Pour the caps and added 4" wall with 3,000 PSI concrete. Also, fill <br />all voids in the existing walls. Liberally vibrate the concrete. <br />This vibration will assure that all voids will be filled and will <br />result in a very strong and adequate structure. <br />If you have any questions, or if I can be of further service, please do <br />not hesitate to contact me. <br />Sincerely, <br />Chester` rniewicz, P.E. <br />CJZ:ch <br />Enclosure <br />